Product Description
Hyundai Accent 2006-2011 Sedan License Bar with Key Access and Logo Cut Out (LB27365)
On the back of a Hyundai Accent sedan, the plate, the lock and the emblem all share the trunk lid. LB27365 is a polished stainless bar made to sit above the plate without covering the other two. Its catalog note reads Includes key access, Includes Logo Cut Out. It fits the Hyundai Accent 4-door sedan, model years 2006 through 2011.
Quick facts
- One piece, cataloged as License Bar, Above plate accent Trim
- Made in the USA from 26-gauge 304 stainless steel with a polished finish
- Goes on with 3M automotive-grade acrylic foam tape right over the existing surface
- Key access and logo cut out included
- No width listed
For this Accent sedan license trim, QAA states the tape holds for a lifetime and won't damage the vehicle's surface.
Let the cutouts set the position
A plain bar has to be placed by eye. A bar with openings has its position built in. During the dry fit, with the liner still on, move the bar until the key access opening sits over the lock and the logo cut out frames the emblem. When both line up, the bar is where it belongs. If they won't line up on your car, don't peel the liner. Call Quality Automotive Trims at 877-752-3811 with LB27365 and we'll check it with you.
Prep for an older finish
Paint from this period may carry old wax, polish and road film. Wash, rinse and dry the area, then wipe with rubbing alcohol until the cloth comes away clean. Pay attention to the paint right around the lock and emblem; residue tends to sit along those edges. Look for chips or lifting clear coat. The Installation tab gives the temperature range.
Pressing it home
Peel the liner, line the openings up with the lock and emblem, and lay the bar down from one end to the other. Press firmly along its full length and work around the edges of each cutout, where the bar is narrowest. Press again a minute later. Keep the trunk closed gently for the first day.
Other Accent sedan parts
Twelve other parts are listed. GC27365 is a one-piece gas door cover trim and LP27365 a one-piece license plate bezel. MI27365 is a four-piece body molding insert kit at 1.25" noted With crease contour. PP27365, PP27366 and PP27367 are pillar post kits of four, six and eight pieces. RD27365 is a one-piece part cataloged as Rear Deck Accent, at 1.5" with a top crease. TH27365, WP27365, WP27366, WQ27365 and WS27365 are named by number only here. Check each listing's photos for its finish.
Checking your car first
Before ordering, confirm two things. The year: Your records should show 2006 through 2011. The body: only the 4-door sedan is listed for this bar. Then look at your trunk lid and check that the lock and emblem are where the photos show them. If someone has removed or moved the emblem, the logo cut out will leave an empty opening, so call before ordering in that case.
Clean it with mild soap and water, and dry it with a soft cloth.
LB27365 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LB27365 |
| UPC | 691821496389 |
| Part type | License Bar, Above plate accent Trim |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | Includes key access, Includes Logo Cut Out |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2006-2011 Hyundai Accent |
Fitment: LB27365
| Vehicle | Years | Body style |
|---|---|---|
| Hyundai Accent | 2006-2011 | 4-door, Sedan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2006-2011 Hyundai Accent
- GC27365: 1-piece Gas Door Cover Trim
- LP27365: 1-piece License Plate Bezel
- MI27365: 4-piece Body Molding Insert Trim Kit
- PP27365: 4-piece Pillar Post Trim
- PP27366: 6-piece Pillar Post Trim
- PP27367: 8-piece Pillar Post Trim
- RD27365: 1-piece Rear Deck Accent
- TH27365: 2-piece Rocker Panel Trim, On the rocker
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Bar, Above plate accent Trim
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LB27365 License Bar, Above plate accent Trim
Does LB27365 have openings for the lock and emblem?
Yes. The catalog notes Includes key access, Includes Logo Cut Out.
Which Accent years does it fit?
2006 through 2011, 4-door sedan.
How do I position it?
Dry-fit it so the openings line up with the lock and emblem. If they don't, call 877-752-3811 before peeling the liner.
How does it attach?
3M automotive-grade acrylic foam tape, directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
How wide is it?
No width is listed.
