Product Description
Jeep Commander 2006-2010 Stainless Molding Insert Kit With Logo Cut Out (MI46095)
MI46095 is a four-piece set of polished 304 stainless molding insert strips for the Jeep Commander 4-door SUV, model years 2006 through 2010. Its record carries a note you don't often see on a molding insert kit, "With Logo Cut Out," and it leaves out something most kits list: a width. Both of those shape how you should approach ordering.
The logo cut out
The catalog says the kit has a logo cut out but doesn't say which strip carries it, what logo it is, or where on the strip it falls. We won't guess. The product photos are the best source for what the cut out looks like and where it sits. Compare them with your own Commander's moldings before you order.
No width on file
Neither the width field nor the bullets give a figure for these strips. That means you can't check the fit with a ruler against a number the way you can with most insert kits. Instead, look closely at the photos, compare the shape and proportions with your moldings, and if you want certainty, call Quality Automotive Trims at 877-752-3811 and ask about MI46095 before you buy. We've flagged the missing width for review.
Fitment
One row: Jeep Commander, 2006 to 2010, tagged 4-door SUV. The title shows the same years. Commanders from 2006 to 2010 are the ones listed.
Material and mounting
26 gauge 304 stainless steel with a polished finish, made in the USA. Mounting is 3M automotive-grade acrylic foam tape, and the strips install directly over the existing surface, so there's no drilling. The Commander prep routine is on the Installation tab.
Installing a strip with a cut out
Wash, dry and alcohol-wipe the moldings. Lay the four strips out by the photos and work out which one carries the cut out before you peel anything. Label each liner. During the dry fit, make sure the cut out lands where the photos show it, then mark the strip ends with painter's tape. Peel the liner, set the strip on the marks, and press firmly along its length, taking care around the edges of the cut out. Repeat for the rest. Full steps and the temperature range are on the Installation tab.
Linked Commander parts
Eleven other parts share the Commander SUV tag. LP46095 is a 1-piece license plate bezel. Pillar posts come in four sets: PP46095 at 4 pieces, PP46096 at 6, PP46097 at 8, and PP46098 at 10. RD46095 is a 1-piece rear deck accent at 2.75, listed for this SUV; check its photos for its exact spot. RR46095 is a 2-piece roof rack trim with two cut outs for cross bars. RR46096, TH46095, WQ46095 and WS46095 are cross-listed by number only.
Care
Polished stainless stays bright with mild soap, water and a soft cloth. Avoid steel wool and abrasive pads, and be gentle around the edges of the cut out when wiping. Questions about MI46095? Call 877-752-3811.
MI46095 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | MI46095 |
| UPC | 691821403837 |
| Part type | Molding Insert |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | With Logo Cut Out |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2006-2010 Jeep Commander |
Fitment: MI46095
| Vehicle | Years | Body style |
|---|---|---|
| Jeep Commander | 2006-2010 | 4-door, SUV |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2006-2010 Jeep Commander
- LP46095: 1-piece License Plate Bezel
- PP46095: 4-piece Pillar Post Trim
- PP46096: 6-piece Pillar Post Trim
- PP46097: 8-piece Pillar Post Trim
- PP46098: 10-piece Pillar Post Trim
- RD46095: 1-piece Rear Deck Accent
- RR46095: 2-piece Roof Rack Trim
- RR46096: 2-piece Roof Rack Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Molding Insert
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: MI46095 Molding Insert
What vehicle is MI46095 for?
The Jeep Commander 4-door SUV, 2006 through 2010.
How wide are the strips?
The catalog doesn't list a width for this kit. Check the photos or call 877-752-3811.
What is the logo cut out?
The record notes a logo cut out but doesn't describe it. The photos show it.
How many pieces are included?
Four.
Do I need to drill?
No. It mounts with 3M automotive-grade acrylic foam tape directly over the existing surface.
