Product Description
Jeep Commander 2006-2010 Roof Rack Trim, 2-Piece, Three Cross Bar Cutouts (RR46096)
RR46096 is for the Jeep Commander with three cross bars. It's a two-piece polished stainless roof rack trim for the Commander 4-door SUV, model years 2006 through 2010, and the record describes it as having three cut outs for cross bars.
Why the count matters
Its twin, RR46095, has two cut outs instead. The pieces are made to sit around the bars, so the number of openings needs to match your roof exactly. Before ordering, go outside and count. Two bars: RR46095. Three: this one. If your setup isn't obvious, take a photo and call Quality Automotive Trims at 877-752-3811.
What's in the kit
Two pieces of 26-gauge 304 stainless steel, polished to a mirror and made in the USA. The record lists no width or length; the photos show the shape. Each piece mounts with 3M automotive-grade acrylic foam tape and installs over the existing surface. QAA states the tape will hold for a lifetime without causing damage to the vehicle surface.
Dry-fit around three openings
Three cutouts means three places that must line up at once. With the liner still on, hold each piece in position and check that every opening clears its bar without bending the trim. Mark both ends with painter's tape. If anything binds, don't force or cut it; call first.
Other linked Commander parts
At the rear there's RD46095, a liftgate accent listed at 2.75 inches, and LP46095, a license plate bezel. For the sides, TH46095 is a six-piece full rocker kit at 7.833 inches, WQ46095 a six-piece wheel well accent, MI46095 a four-piece body molding insert with logo cut out, and WS46095 a four-piece window sill set. Pillar kits PP46095 through PP46098 run from four to ten pieces. Each listing shows its own finish.
Getting the surface ready
Wash and dry the rack area. Clean each tape footprint with a residue-free cleaner, changing cloths until one comes back clean. If the surface is weathered or chalky, correct that first.
Pressing it on
Start at one end, peel a short length of liner, and press firmly. Continue along the piece, easing it around each cutout. Fit the second accent the same way. Choose a dry, mild day. The Installation tab gives the complete process.
Taking your time
Set aside an unhurried hour. The three openings make this a more careful job than a plain strip, and rushing the dry-fit is where misalignment starts. Finish the first piece completely, step back, and only then begin the second.
Proportion from the side
With three bars, the trim is broken into more visible segments. Look at the photos from a side angle to picture how that reads on your Commander.
Ladder, not roof
A step ladder keeps you level with the Commander roof; avoid leaning on the rack.
Upkeep
Wait a few days to wash. Then mild soap and a soft cloth. The finish is polished into the steel, with no plating to wear.
Decorative
It doesn't replace factory parts or change the rack's function.
Ordering
Count the bars, confirm a 2006 to 2010 Commander, and you're ready. SKU RR46096, UPC 691821685318. Phone 877-752-3811.
RR46096 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | RR46096 |
| UPC | 691821685318 |
| Part type | Roof Rack Trim |
| Pieces in kit | 2 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | With three cut outs for cross bars |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2006-2010 Jeep Commander |
Fitment: RR46096
| Vehicle | Years | Body style |
|---|---|---|
| Jeep Commander | 2006-2010 | 4-door, SUV |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2006-2010 Jeep Commander
- LP46095: 1-piece License Plate Bezel
- MI46095: 4-piece Molding Insert
- PP46095: 4-piece Pillar Post Trim
- PP46096: 6-piece Pillar Post Trim
- PP46097: 8-piece Pillar Post Trim
- PP46098: 10-piece Pillar Post Trim
- RD46095: 1-piece Rear Deck Accent
- RR46095: 2-piece Roof Rack Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Roof Rack Trim
- Unpack all 2 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: RR46096 Roof Rack Trim
How is RR46096 different from RR46095?
RR46096 has three cut outs for cross bars; RR46095 has two.
Which Commander does it fit?
The Jeep Commander 4-door SUV, 2006 through 2010.
How many pieces?
Two.
Is there a liftgate accent?
Yes, RD46095, listed at 2.75 inches.
How does it attach?
3M tape over the existing surface.
