Product Description
2005-2010 VW Jetta Above-Plate Deck Trim with Logo, 1.35 Inches (RD25666)
RD25666 is the Jetta deck accent with a placement note: the listing describes it as going above the license plate, with logo. It is one piece, 1.35 inches wide, in mirror-polished 304 stainless steel, made in the USA, for the Volkswagen Jetta 4-door sedan from 2005 through 2010. 3M tape holds it on.
What "with logo" means here
The data says "with logo" and stops there. It does not describe whether the strip works around the badge or carries a logo of its own. The photos are the place to see it, and a quick call can clear it up before you order.
The other Jetta deck trim
RD25665 is the wider sibling at 1.75 inches, with no placement or logo note. If you want the piece that QAA specifically lists for above the plate, this is it.
Model years
2005 through 2010 for the sedan: six years in all.
Pairing with the license bezel
LP25665 is the license plate bezel for this Jetta, listed at 8.17 inches wide. Since this accent sits above the plate, the bezel is its closest neighbor, and the two are an easy pair to install in one session.
More Jetta trim
- FP25665, a 16-piece front bumper trim, 1.625 inches wide
- TH25665, an eight-piece lower rocker kit, 1.875 inches wide
- WQ25665 and WQ25666, four- and eight-piece wheel well accents
- WS25665, a four-piece window sill set, 1 inch wide
- PP25665 and PP25666, pillar kits in four and six pieces
Material
26-gauge 304 stainless, polished. The finish is the metal itself.
Mounting
The Jetta strip above the license plate bonds over the existing surface with 3M automotive-grade acrylic foam tape. QAA says that tape will hold for a lifetime without damaging the sedan.
Clean around the badge area
The area above a plate collects grime. Wash, dry, and wipe it with a residue-free cleaner, taking care around any badge edges. Repair any paint damage first.
Fitting it
Dry-fit with the liner on and compare closely to the photos, especially near the logo. Mark the position with painter's tape. On a dry, mild day, peel the liner and press from the center outward. Then fit the bezel below and check the spacing. The Installation tab has full steps.
Care
Wait a few days before washing. Mild soap and a soft cloth, and skip polishing compounds near the logo area.
Using it with the front bumper trim
The 16-piece front bumper trim is 1.625 inches wide, a bit wider than this strip. If you want a matched front and back, the photos of both are worth comparing to see how they read on the car.
Why stainless
Polished 304 stainless has no coating to wear thin; check the bezel, rocker kit, and wheel well listings for this Jetta for their finish. Check each listing's finish before buying pieces.
Before ordering
Confirm the year and the sedan body, and decide between this above-plate strip and the wider RD25665. If you are unsure whether they can be used together, call before ordering either.
Part details
SKU RD25666, UPC 691821527267. Call Quality Automotive Trims at 877-752-3811 with questions about the logo detail.
RD25666 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | RD25666 |
| UPC | 691821527267 |
| Part type | Rear Deck Accent |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 1.35" |
| Coverage / notes | Above License Plate, with Logo |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2005-2010 Volkswagen Jetta |
Fitment: RD25666
| Vehicle | Years | Body style |
|---|---|---|
| Volkswagen Jetta | 2005-2010 | 4-door, Sedan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2005-2010 Volkswagen Jetta
- FP25665: 16-piece Front Bumper Trim
- LP25665: 1-piece License Plate Bezel
- PP25665: 4-piece Pillar Post Trim
- PP25666: 6-piece Pillar Post Trim
- RD25665: 1-piece Rear Deck Accent
- TH25665: 8-piece Rocker Panel Trim, Lower Kit
- WQ25665: 4-piece Wheel Well Accent Trim
- WQ25666: 8-piece Wheel Well Accent Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rear Deck Accent
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: RD25666 Rear Deck Accent
Which Jetta does RD25666 fit?
The Volkswagen Jetta 4-door sedan, 2005 through 2010.
Where does it go?
The listing places it above the license plate, with logo.
How wide is it?
1.35 inches.
How does it differ from RD25665?
RD25665 is 1.75 inches wide with no placement or logo note.
How does it install?
With 3M automotive-grade acrylic foam tape over the existing surface.
