Product Description
Toyota Tacoma 1995-2004 Stainless Gas Door Trim (GC95175)
GC95175 covers a long run of Tacoma pickups: the Fitment tab lists the Toyota Tacoma Pickup Truck, 2-door and 4-door, for model years 1995 through 2004, ten years on one row. The title reads 1995-2004 as well, so the title and the row agree. It's a single polished stainless fuel door overlay for the Tacoma, 304 stainless steel at 26 gauge, made in the USA. Its mounting method on the Tacoma is 3M automotive-grade acrylic foam tape.
It is not a replacement cap and not a replacement part. You MUST have the existing gas door to install this piece. The truck's original door stays; the stainless is bonded on top of it.
Three other parts are cross-listed, and two of them need careful reading because their tags are narrow. TH95175 is a ten-piece upper rocker kit, 4 to 4.5 inches wide, spanning from the bottom of the molding down, tagged for the 2-door Regular Cab with the short bed and 4WD. TH95177 is the same type of ten-piece upper kit at 4 to 4.5 inches, tagged for the Extra Cab with the short bed and 4WD. If your truck doesn't match one of those combinations, those kits aren't listed for it. DH95177 is a two-piece tailgate handle accent trim for 2-door and 4-door trucks. The gas door trim itself carries no cab, bed or drive restriction across the ten years. Check each listing for its finish.
On an older truck, the tape is only as good as the paint under it. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle; give it a firm surface to hold. Inspect the door for chipped edges, flaking or chalky clear coat and blisters, and repair or polish them out first. Make sure the door still closes flush.
The trim installs directly over the existing surface, with no drilling. Wash the door, rinse, and dry it completely, then wipe with a degreaser, twice if it's carried years of wax. Lay the trim on the closed door with the liner on and move it until the visible paint around it forms an even frame. Mark that position with painter's tape. Peel the liner, set the trim on the marks and press firmly over the whole face, then repeat a minute later. Open the door slowly to confirm the hinge moves freely. The Installation tab covers the steps in more detail.
Polished 304 stainless gives a bright shine, and the 26 gauge sheet keeps the overlay thin. Do the install on a dry, mild day and let the tape set overnight. Afterward, mild soap and a soft cloth are all it needs; wipe away fuel drips.
Ten model years is a wide span, so the gas door piece is one of the easier Tacoma parts to match: any 2-door or 4-door Tacoma pickup from 1995 to 2004 is on the row. To confirm fit or sort out which rocker kit matches your cab, call Quality Automotive Trims at 877-752-3811 and mention GC95175. The UPC is on the Specs tab.
GC95175 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | GC95175 |
| UPC | 691821625024 |
| Part type | Gas Door Cover Trim |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1995-2004 Toyota Tacoma |
| Not included | This is NOT a replacement gas cap or door; your existing gas door is required |
Fitment: GC95175
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Tacoma | 1995-2004 | 2-door, 4-door, Pickup Truck |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 1995-2004 Toyota Tacoma
- DH95177: 2-piece Tailgate Handle Accent Trim
- TH95175: 10-piece Rocker Panel Trim, Upper Kit
- TH95177: 10-piece Rocker Panel Trim, Upper Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Gas Door Cover Trim
- Confirm your vehicle still has its original gas door. This trim mounts over it and does not replace it.
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: GC95175 Gas Door Cover Trim
Is GC95175 a replacement gas door?
No. It is not a replacement cap or replacement part. You MUST have the existing gas door to install this piece.
Which Tacoma years fit?
The 1995-2004 Toyota Tacoma Pickup Truck, listed as 2-door and 4-door.
What is it made of?
Polished 304 stainless steel, 26 gauge, made in the USA.
Does it need drilling?
No. It installs directly over the existing surface with 3M automotive-grade acrylic foam tape.
How long does the tape hold?
QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Which rocker kit fits my cab?
TH95175 is tagged Regular Cab, short bed, 4WD; TH95177 is tagged Extra Cab, short bed, 4WD. Call if your truck differs.
