Product Description
TH95175 Toyota Tacoma 1995-2004 Regular Cab 4WD Upper Kit, 4"-4.5" Tapered, 10 Pieces
TH95175 is a ten-piece polished stainless steel Upper Kit for the 1995-2004 Toyota Tacoma, tagged "2-door, Pickup Truck, Regular Cab, Short Bed, 4WD." It "Spans from the bottom of the molding DOWN to the specified width," and the width is "4" - 4.5" tapered."
Reading the tag closely
Every part of the tag narrows the fit: the Regular Cab, the short bed and 4WD. The record doesn't list this kit for a 2WD truck or a different bed. If any of those three don't describe your Tacoma, call 877-752-3811 before ordering.
Regular Cab or Extra Cab
The linked TH95177 is the Extra Cab version, tagged "Extra Cab, Short Bed, 4WD." It has the same ten-piece count and the same 4" to 4.5" taper. The only difference the record shows is the cab, so match the listing to your truck's cab.
Accessories linked
- DH95177: Tailgate Handle Accent Trim, 2 pieces
- GC95175: Gas Door Cover Trim, 1 piece
Both are tagged "2-door, 4-door, Pickup Truck." Ask us if you'd like either with this kit.
Half an inch of taper
The band below the molding goes from 4" to 4.5" along each piece. The record doesn't say which end is taller; use the photos during the dry fit and label each liner with the direction once you've found it.
Steel and tape
The 1995-2004 Tacoma Regular Cab short bed 4WD kit is ten strips of polished 26 gauge 304 stainless from a USA shop, 4" to 4.5" wide, carried below the molding on 3M automotive-grade acrylic foam tape. QAA says the tape will hold for a lifetime with no harm to the pickup.
Preparing the paint
Hose off loose dirt first, then wash with soapy water and rinse. Take off wax with a wax-and-grease remover, repair chips or rust, and wipe with isopropyl alcohol just before fitting.
Molding
Each piece starts at the molding's lower edge. It must be straight and secure along the whole run you'll cover.
Ten pieces
The record doesn't list where they go. Lay them out front to back and match each to the photos.
Fitting
Dry fit with painter's tape, open the doors, and sight along the side. Bond with short liner peels and firm pressure.
Further back on the Tacoma
Copy the first Tacoma run's gaps and taper direction.
Conditions
Mild, dry and shaded. Leave it a day before washing.
Seeing the band
Mark about 4.5" below the molding with masking tape along the doors and step back. The lower edge of the trim will sit between 4" and 4.5" below the molding, depending on where you are along each piece. If the tape runs past the door bottom, send a photo before ordering.
One door first
Fit a single door, then step back and check the line before carrying on.
Lay the ten pieces on a soft towel while sorting so the polished faces stay unmarked, and keep the box until every piece is on.
Call 877-752-3811 with your year, cab, bed and drive. Quality Automotive Trims, SKU TH95175, UPC 691821338351.
TH95175 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH95175 |
| UPC | 691821338351 |
| Part type | Rocker Panel Trim, Upper Kit |
| Pieces in kit | 10 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 4" to 4.5" tapered |
| Coverage / notes | Spans from the bottom of the molding DOWN to the specified width |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1995-2004 Toyota Tacoma |
Fitment: TH95175
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Tacoma | 1995-2004 | 2-door, Pickup Truck, Regular Cab, Short Bed, 4WD |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 1995-2004 Toyota Tacoma
- DH95177: 2-piece Tailgate Handle Accent Trim
- GC95175: 1-piece Gas Door Cover Trim
- TH95177: 10-piece Rocker Panel Trim, Upper Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Upper Kit
- Unpack all 10 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH95175 Rocker Panel Trim, Upper Kit
Which Tacoma does TH95175 fit?
The 1995-2004 Toyota Tacoma Regular Cab, short bed, 4WD.
Is there an Extra Cab kit?
Yes, TH95177, with the same count & taper.
How wide is it?
Tapered, 4" to 4.5", from the bottom of the molding down.
How many pieces?
Ten.
