Product Description
Dodge Intrepid 1998-2005 Sedan Stainless Gas Cap Door Trim (GC42910)
For a 1998-2005 Intrepid 4-door sedan, GC42910 dresses the fuel door in polished stainless, a small bright detail you see each time you stop for fuel. It's one piece of 304 stainless steel at 26 gauge, made in the USA, and mounts with 3M automotive-grade acrylic foam tape. Eight model years are covered by the single row on the Fitment tab.
It is not a replacement cap and not a replacement part. You MUST have the existing gas door to install this piece, since the trim mounts on top of that door. A door that is missing or broken has to be dealt with before this accent can be used.
Building a set for the Intrepid. This sedan has more cross-listed stainless than many gas door pages, which makes it a good candidate for a coordinated look. DH42910 is a four-piece door handle accent set. For the pillars, there are two choices: PP42910 with four pieces and PP42911 with six. This part's catalog sheet doesn't say what PP42911's two additional pieces cover, so compare the photos on both listings, or call, before choosing. With the gas door, handles and pillars together, you'd have polished stainless repeated along the side of the car. Each of those parts has its own listing and installation notes.
Which to do first. The gas door trim is the easiest of the group. It's a single flat piece with no mate to line up. That makes it a good way to see the finish on your Intrepid and get comfortable with the tape before tackling a four- or six-piece set. The trim is one polished stainless piece, listed for the Intrepid's fuel door.
No drilling. GC42910 installs directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle. Because the tape bonds to the paint, inspect the door first. On a sedan in this year range, look for sun-faded or peeling clear coat and chipped edges, and repair those areas. The door should also close flush.
Fitting it. Wash and dry the door, then wipe it with a degreaser. Keep the liner on while you hold the trim in place and center it so the margin of paint around it is even. Use painter's tape on the body to mark the position. Peel the liner, align with the marks, and press firmly over every part of the face; repeat the firm press after a minute. Open the door gently to confirm clearance. Full steps are on the Installation tab.
Finish and care. Polished 304 stainless reflects light brightly, and 26 gauge keeps the overlay thin. Install on a mild, dry day and give the tape overnight before it gets wet. Clean with gentle soap and a soft cloth, and wipe off fuel drips.
For help choosing between the pillar sets or confirming fitment, call Quality Automotive Trims at 877-752-3811 and mention GC42910. The UPC is listed on the Specs tab.
GC42910 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | GC42910 |
| UPC | 691821442096 |
| Part type | Gas Door Cover Trim |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1998-2005 Dodge Intrepid |
| Not included | This is NOT a replacement gas cap or door; your existing gas door is required |
Fitment: GC42910
| Vehicle | Years | Body style |
|---|---|---|
| Dodge Intrepid | 1998-2005 | 4-door, Sedan |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 1998-2005 Dodge Intrepid
- DH42910: 4-piece Door Handle Accent Trim
- PP42910: 4-piece Pillar Post Trim
- PP42911: 6-piece Pillar Post Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Gas Door Cover Trim
- Confirm your vehicle still has its original gas door. This trim mounts over it and does not replace it.
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: GC42910 Gas Door Cover Trim
Is GC42910 a replacement gas door?
No. It is not a replacement cap or replacement part. You must have the existing gas door to install this piece.
Which Intrepid does it fit?
The 1998-2005 Dodge Intrepid 4-door sedan.
What is it made of?
Polished 304 stainless steel, 26 gauge, made in the USA.
Does it require drilling?
No. It installs directly over the existing surface with 3M automotive-grade acrylic foam tape.
How long does the tape hold?
QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
What else matches my Intrepid?
The catalog cross-lists DH42910 (four-piece door handle accents) and pillar post sets PP42910 (four pieces) and PP42911 (six pieces).
