Product Description
Kia Amanti 2004-2010 Polished Stainless License Plate Bezel (LP24800)
The Kia Amanti 4-door sedan gets a mirror-polished plate-area frame with LP24800. The fitment row runs seven model years, 2004 through 2010, sedan only and without trim exclusions. It's a one-piece License Plate Bezel made in the USA from 26-gauge 304 stainless steel.
Nothing on the listing describes the bezel's size or any openings, so use the product photos as your template. Line them up mentally with the plate area on your Amanti, looking at any lock, emblem or lighting near the plate. If there's a mismatch, or you want to double-check before ordering, phone Quality Automotive Trims at 877-752-3811 and give the SKU LP24800.
On the paint, with tape
Mounting is 3M automotive-grade acrylic foam tape, directly over the existing surface; no drilling. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle. With model years as early as 2004, give the paint around the plate an honest look before you begin: repair chips and lifting clear coat, and remove leftover adhesive from old frames or stickers. Then wash with soapy water, rinse, dry, and wipe with rubbing alcohol. Hold the bezel in place, liner on, and look at it square from behind; once the margins are even, mark it with painter's tape. Peel the liner, line up with the marks and press firmly around the whole frame, twice. See the Installation tab for the temperature range. When the plate goes back on, snug the screws without overtightening, so the plate doesn't press on the new frame while the tape is still settling.
Upper trim, with or without pillars
Two window packages are listed for the Amanti, and neither includes window sills. WP24800 has ten pieces and Includes Upper Trim and Pillar Posts, NO Window Sills. WP24801 has four pieces and Includes Upper Trim, NO Pillar Posts, NO Window Sills. To fit pillars separately, there are three pillar post kits: PP24800 with four pieces, PP24801 with six and PP24802 with eight, which includes a rear triangle piece, so you can compare their photos before choosing. Before choosing the ten-piece package and a pillar kit together, compare photos or call first.
Rocker and fuel door
TH24800 is a four-piece rocker trim at 3.375" that Installs below the door. GC24800 is a one-piece gas door cover trim noted With "KIA" cut out. Check each listing for its finish.
Starting with the bezel
The bezel is the quickest of these jobs and the only one cataloged here for the plate area. Once it's on, you can see polished stainless against your Amanti's paint and decide whether the rest of the list appeals.
Before ordering
Your paperwork should show an Amanti sedan from 2004 to 2010. If you keep a frame on the plate, refit it during the dry fit to make sure it doesn't overlap the bezel. Clean the stainless with mild soap and water and dry it with a soft towel. Amanti questions this page leaves open are welcome at 877-752-3811.
LP24800 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LP24800 |
| UPC | 691821542802 |
| Part type | License Plate Bezel |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2004-2010 Kia Amanti |
Fitment: LP24800
| Vehicle | Years | Body style |
|---|---|---|
| Kia Amanti | 2004-2010 | 4-door, Sedan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2004-2010 Kia Amanti
- GC24800: 1-piece Gas Door Cover Trim
- PP24800: 4-piece Pillar Post Trim
- PP24801: 6-piece Pillar Post Trim
- PP24802: 8-piece Pillar Post Trim
- TH24800: 4-piece Rocker Panel Trim, On the rocker
- WP24800: 10-piece Window Trim Package
- WP24801: 4-piece Window Trim Package
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Plate Bezel
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LP24800 License Plate Bezel
Which Amanti does LP24800 fit?
The 2004-2010 Kia Amanti 4-door sedan.
Does it need drilling?
No. It installs directly over the existing surface with 3M automotive-grade acrylic foam tape. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Are dimensions listed?
No. Use the photos or call 877-752-3811.
Do the Amanti window packages include sills?
No. WP24800 includes upper trim and pillar posts; WP24801 is upper trim only.
How many pieces?
One bezel.
