Product Description
Buick Lucerne 2006-2011 Stainless License Plate Bezel (LP46550)
LP46550 is a one-piece polished stainless License Plate Bezel for the Buick Lucerne 4-door sedan, model years 2006 through 2011. The fitment row covers six years with no trim exclusions. It's made in the USA from 26-gauge 304 stainless steel with a mirror finish, and it frames the plate area.
Tape on this part, and a gasket note on others
The bezel mounts with 3M automotive-grade acrylic foam tape and installs directly over the existing surface, with no drilling. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle. On the same sheet, two Lucerne wheel well sets spell out their installation in a way worth noticing: WQ46550 and WQ46551, both four-piece wheel well accent sets at 0.5", are noted With 3M adhesive installation NO black rubber gasket edging. WQ46550 is also Cut to fit with Rocker kit sold separately, while WQ46551 is Full Length. Those notes describe the wheel well sets only. The bezel's listing doesn't mention a gasket either way.
Rocker and rear pieces
TH46551 is an eight-piece lower kit listed from 2" to 2.5625" that spans from the bottom of the door up to the specified width. WQ46550's note mentions a rocker kit sold separately without naming one, so if you're pairing them, call to confirm which rocker kit it's meant for. RD46550 is a one-piece Rear Deck Accent at 1.5" wide on its own listing, the other part cataloged for the back, so view its photos with this bezel's if you're considering both. PP46550 and PP46551 are pillar post kits with four and six pieces, and GC46550 is a one-piece gas door cover trim. WQ46552, WQ46553 and WZ46550 are cross-listed by number only. Check each listing for its finish.
Outline
No dimensions or cutout notes are listed for the bezel. Compare the product photos with the area around your plate, including any lock, emblem or lighting. If something doesn't match, call Quality Automotive Trims at 877-752-3811 with SKU LP46550.
Preparing the paint
On a sedan built between 2006 and 2011, inspect the plate area before anything else. Touch up chips and repair any clear coat that's lifting. Lift off old adhesive with a plastic tool, wash, rinse and dry, then wipe with rubbing alcohol. Dry-fit the bezel with the liner on, mark it with painter's tape, peel and press firmly around the frame. The Installation tab gives the temperature range.
Where to begin
The bezel is the smallest job on this list. Fitting it first shows you how polished stainless looks on your Lucerne before you take on an eight-piece rocker kit, and it gives you a feel for how the foam tape grabs once the liner is off.
Before ordering
Your records should list a Lucerne sedan between 2006 and 2011. If you use a plate frame, refit it during the dry fit to make sure it doesn't overlap the bezel. Clean with mild soap and water and a soft towel.
LP46550 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LP46550 |
| UPC | 757565501151 |
| Part type | License Plate Bezel |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2006-2011 Buick Lucerne |
Fitment: LP46550
| Vehicle | Years | Body style |
|---|---|---|
| Buick Lucerne | 2006-2011 | 4-door, Sedan |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2006-2011 Buick Lucerne
- GC46550: 1-piece Gas Door Cover Trim
- PP46550: 4-piece Pillar Post Trim
- PP46551: 6-piece Pillar Post Trim
- RD46550: 1-piece Rear Deck Accent
- TH46551: 8-piece Rocker Panel Trim, Lower Kit
- WQ46550: 4-piece Wheel Well Accent Trim
- WQ46551: 4-piece Wheel Well Accent Trim
- WQ46552: 4-piece Wheel Well Accent Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Plate Bezel
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LP46550 License Plate Bezel
Which Lucerne does LP46550 fit?
The 2006-2011 Buick Lucerne 4-door sedan.
Does it need drilling?
No. It installs directly over the existing surface with 3M automotive-grade acrylic foam tape. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Does the bezel have a rubber gasket?
Its listing doesn't mention one. The no-gasket notes are on the WQ46550 and WQ46551 wheel well sets.
Are dimensions listed?
No. Use the photos or call 877-752-3811.
How many pieces?
One.
