Product Description
Chevrolet Impala 2014-2020 Stainless License Plate Bezel (LP54135)
One line on the LP54135 fitment row deserves your attention before anything else: "Does not fit the Limited." The bezel is listed for the Chevrolet Impala 4-door sedan from 2014 through 2020, seven model years, but the catalog excludes the Impala Limited. That restriction sits in the body-style field rather than in a separate note, and it appears on every Impala part linked to this one as well. If your car is badged Limited, this bezel isn't listed for it. If you're unsure which you have, call Quality Automotive Trims at 877-752-3811 with the SKU before ordering.
The bezel is one piece of 26-gauge 304 stainless steel, polished to a mirror finish and made in the USA. It frames the plate area, and because it's solid stainless, the brightness doesn't depend on any plating. The thin sheet follows the surface closely. No dimensions are published, so use the product photos to judge the shape against your own car.
Installation is by 3M automotive-grade acrylic foam tape, directly over the existing surface; there's no drilling. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle. The bond rides on the paint, so begin with an inspection: repair chips or flaking clear coat near the plate first. Then strip old adhesive, wash with soap and water, dry fully and wipe the area with rubbing alcohol.
A dry fit comes next. Keep the backing on, hold the bezel up, and step back until you can see the rear of the sedan as a whole. Shift it until the margins look right and mark the spot with a few strips of painter's tape. Peel, line it up with the marks, and press firmly all the way around. The Installation tab covers the order of work and the temperature range.
The Impala has a long list of linked parts, every one carrying the same Limited exclusion. Described on this sheet: DH54135, an eight-piece Door Handle Cover Kit; GC54135, a one-piece Gas Door Cover Trim; HL54135, a two-piece Head Light Accent Trim; MC54135, a two-piece Mirror Cover Set described as a snap on replacement set; MC54136, another two-piece Mirror Cover Set with no note; and PP54135 and PP54136, Pillar Post Trim kits with four and six pieces. RB54135, RD54135, TH54135, WQ54135, WQ54136, DH54135B and DH54137B are linked by number only, so their details aren't on this sheet. The two mirror cover sets don't state how they differ beyond that one note; check both listings.
Before you order, read your records for the model year, and make sure the car isn't the Limited. Try any plate frame at the dry fit. Clean the bezel with mild soap, water and a soft cloth, and avoid abrasives. Mention LP54135 when you call 877-752-3811.
Pick a dry, mild day for the work, and leave the bezel alone for a while after pressing it on so the adhesive can settle before it meets water. Since it's a single piece with no hardware, preparation takes most of the time.
LP54135 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LP54135 |
| UPC | 691821609338 |
| Part type | License Plate Bezel |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2014-2020 Chevrolet Impala |
Fitment: LP54135
| Vehicle | Years | Body style |
|---|---|---|
| Chevrolet Impala | 2014-2020 | 4-door, Sedan, Does not fit the Limited |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2014-2020 Chevrolet Impala
- DH54135: 8-piece Door Handle Cover Kit
- GC54135: 1-piece Gas Door Cover Trim
- HL54135: 2-piece Head Light Accent Trim
- MC54135: 2-piece Mirror Cover Set
- MC54136: 2-piece Mirror Cover Set
- PP54135: 4-piece Pillar Post Trim
- PP54136: 6-piece Pillar Post Trim
- RB54135: 1-piece Rear Bumper Trim Accent
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Plate Bezel
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LP54135 License Plate Bezel
Does LP54135 fit the Impala Limited?
No. The fitment row says "Does not fit the Limited."
Which Impala years are listed?
2014 through 2020, 4-door sedan, excluding the Limited.
How does it attach?
With 3M automotive-grade acrylic foam tape directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
What's the difference between MC54135 and MC54136?
MC54135 is noted as a snap on replacement set; MC54136 has no note. Call 877-752-3811 for details.
What is the bezel made of?
One piece of polished 26-gauge 304 stainless steel, made in the USA.
