Product Description
Chevy Impala 2014-2020 Rear Bumper Trim, 2.5 Inches Wide, Not for the Limited (RB54135)
RB54135 is a one-piece, 2.5-inch-wide rear bumper trim for the Chevrolet Impala 4-door sedan from 2014 through 2020. The fitment carries an important exclusion: it does not fit the Limited. The trim is 304 stainless steel with a mirror polish, made in the USA, and it attaches with 3M tape.
The Limited exclusion
Every item linked to this Impala carries the same "Does not fit the Limited" note, so the whole lineup is for the non-Limited sedan. The catalog does not explain the difference, but if your Impala is badged Limited, this is not the right part. Call before ordering if you are unsure which you have.
Years
2014, 2015, 2016, 2017, 2018, 2019, and 2020.
Width
2.5 inches, per the catalog. That is a generous band for a bumper trim. For comparison, the linked rear deck accent, RD54135, is listed at 0.875 inches, so the bumper piece will be the more prominent of the two.
Rear and side pieces
LP54135 frames the plate and GC54135 covers the gas door. TH54135 is an eight-piece lower rocker kit with a width of 3 to 4.375 inches. Two wheel well kits are listed at 0.875 inches: WQ54135, four pieces cut to fit with a rocker kit sold separately, and WQ54136, six pieces, full length, with the rear pieces segmented into two. HL54135 head light trim and PP54135 or PP54136 pillar kits round things out.
Door handles and mirrors
Three eight-piece door handle kits are linked: DH54135, DH54135B, and DH54137B, the last marked for cars with four smart key points. The catalog does not state how DH54135 and DH54135B differ, so compare photos. For mirrors, MC54135 is described as a snap-on replacement set, while MC54136 is a standard mirror cover set.
Material
The Impala trim is 26-gauge 304 stainless with a mirror finish and no plating.
Mounting
On the Impala, 3M automotive-grade acrylic foam tape keeps the 2.5" bumper trim in place over the existing surface. That tape, QAA says, will hold for a lifetime and leave the sedan unmarked.
Getting a wide strip to bond
Clean the full area the strip will cover: wash, dry, and wipe with a residue-free cleaner. Make sure there is no leftover wax at the edges. Dry-fit with the liner on, measure from both ends, mark with masking tape, then peel and press from the middle outward on a dry, mild day. Wait a few days to wash. See the Installation tab.
Care
Mild soap and a soft cloth. Keep abrasive pads off the mirror face.
Rocker and wheel well, planned together
If side trim is on your list, decide on the rocker kit first. WQ54135 is cut to meet a rocker kit, while WQ54136 runs full length, so the right wheel well choice depends on whether TH54135 is going on the car. Getting that pairing right before ordering avoids overlaps or gaps along the lower body.
Part details
SKU RB54135, UPC 691821352838. Call Quality Automotive Trims at 877-752-3811 if you need to confirm whether your Impala is a Limited.
RB54135 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | RB54135 |
| UPC | 691821352838 |
| Part type | Rear Bumper Trim Accent |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 2.5" |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2014-2020 Chevrolet Impala |
Fitment: RB54135
| Vehicle | Years | Body style |
|---|---|---|
| Chevrolet Impala | 2014-2020 | 4-door, Sedan, Does not fit the Limited |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2014-2020 Chevrolet Impala
- DH54135: 8-piece Door Handle Cover Kit
- GC54135: 1-piece Gas Door Cover Trim
- HL54135: 2-piece Head Light Accent Trim
- LP54135: 1-piece License Plate Bezel
- MC54135: 2-piece Mirror Cover Set
- MC54136: 2-piece Mirror Cover Set
- PP54135: 4-piece Pillar Post Trim
- PP54136: 6-piece Pillar Post Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rear Bumper Trim Accent
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: RB54135 Rear Bumper Trim Accent
Does RB54135 fit the Impala Limited?
No. The fitment states it does not fit the Limited.
Which years does it fit?
The Chevrolet Impala 4-door sedan, 2014 through 2020, excluding the Limited.
How wide is it?
2.5 inches.
How many pieces?
One.
What rear trim pairs with it?
RD54135 rear deck accent, LP54135 license plate bezel, and GC54135 gas door cover.
How does it install?
With 3M automotive-grade acrylic foam tape over the existing surface.
