Product Description
Toyota Tundra 2014-2020 Stainless Front Bumper Trim, 1 Piece, 2.62" Wide (FB14145)
FB14145 is a single polished stainless front bumper trim for the Toyota Tundra pickup, 2014 through 2020, listed for both 2-door and 4-door trucks. The Tundra trim is 2.62" wide, made in the USA from 304 stainless steel at 26 gauge. A strip of 3M automotive-grade acrylic foam tape bonds it to the Tundra's bumper.
Fitment
One row: Toyota Tundra, 2014-2020, 2-door, 4-door, Pickup Truck. Seven model years, both door counts. Cab and bed don't appear on this row. The Fitment tab shows it.
Width
The catalog lists the width at 2.62" and gives no length. The product photos show the shape and position. Compare them with the front of your truck and call if you want to confirm.
Tundra trim on this sheet
A wide range of Tundra listings is cross-referenced here:
- SG14145, a two-piece front grille accent.
- HT14145, hood vent trim.
- GC14145, gas door cover trim.
- RT14145, a tailgate accent listed at 2.5" width by 64" length.
- SGR14145, six "TUNDRA" tailgate letter inserts, noted as stainless letters.
- MI14145, an eight-piece body molding insert kit at 1.5 for the Crew Max with the 5.5 bed.
- MI14146, an eight-piece body molding insert kit for the Double Cab.
TH14145, TH14146 and WQ14145 are listed too, with details on their own pages. The two molding kits are split by cab, so match the one for your truck.
Material and mounting
The Tundra bumper trim is polished 304 stainless, 26 gauge, and fits over the existing surface without drilling. QAA says its tape will hold for a lifetime and cause no damage to the pickup's surface.
Bumper prep
A truck's front bumper takes bugs, gravel dust and road film. Wash it well, rinse, and degrease the mounting area until a clean cloth comes away clean. Check the surface where the trim goes for chips or peeling. Dry completely.
Lining it up
Hold the trim in place with the liner on and step back in front of the truck. Center it using a fixed reference such as the grille, measuring to each end. Mark the ends with painter's tape. Peel, align, and press firmly along its entire length, then again after a minute. The Installation tab has full prep.
Why the bumper
The front end is the face of the truck. Polished steel on the bumper ties in with grille trim and changes nothing about the bumper itself.
Checklist before ordering
Confirm a 2014-2020 Tundra, compare the photos with your front bumper, and measure where the trim would sit against the 2.62" width. If you're also considering the grille accent, hood vent trim or tailgate pieces, review those listings now so you can plan the work in one session. Each one installs on its own, so there's no rush to do them all at once.
Conditions
Mild, dry weather, out of direct sun. Keep the truck dry overnight.
Care
Mild soap and a soft cloth are all it takes to clean.
Questions
Tundra questions on the bumper trim FB14145 can go to 877-752-3811. The Tundra bumper trim's UPC is in Specs.
FB14145 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | FB14145 |
| UPC | 691821336821 |
| Part type | Front Bumper Trim |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 2.62" |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2014-2020 Toyota Tundra |
Fitment: FB14145
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Tundra | 2014-2020 | 2-door, 4-door, Pickup Truck |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2014-2020 Toyota Tundra
- GC14145: 1-piece Gas Door Cover Trim
- HT14145: 1-piece Hood Vent Trim
- MI14145: 8-piece Body Molding Insert Trim Kit
- MI14146: 8-piece Body Molding Insert Trim Kit
- RT14145: 1-piece Tailgate Accent Trim
- SG14145: 2-piece Front Grille Accent Trim
- SGR14145: 6-piece "TUNDRA" Tailgate Letter Inserts
- TH14145: 6-piece Rocker Panel Trim, Lower Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Front Bumper Trim
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: FB14145 Front Bumper Trim
What does FB14145 fit?
The 2014-2020 Toyota Tundra pickup, 2-door and 4-door.
How wide is it?
The catalog lists 2.62" width.
How many pieces?
One front bumper trim.
What is it made of?
Polished 304 stainless steel, 26 gauge, made in the USA.
Does it need drilling?
No. It installs directly over the existing surface with 3M automotive-grade acrylic foam tape.
How long does the tape hold?
QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
