Product Description
Toyota Tundra 2014-2020 Grille Accent, 2-Piece Polished Stainless (SG14145)
SG14145 is a two-piece polished stainless grille accent for the Toyota Tundra pickup, 2014 through 2020, in both 2-door and 4-door configurations. The record links it to ten other Tundra listings covering the front, sides and tailgate.
Which Tundras
Seven model years, 2014 to 2020, 2-door and 4-door pickup, with no trim exclusions on this part. Some linked parts are cab-specific (see below), but this grille set isn't.
Two pieces
The record gives the count but no layout or dimensions. Look at the product photos to see where the pair sits on the grille. Quality Automotive Trims can answer specifics at 877-752-3811.
Material
Both Tundra grille pieces are 26-gauge 304 stainless steel, mirror-polished in the USA. 3M automotive-grade acrylic foam tape mounts them over the existing surface, and QAA says it will hold for a lifetime without harming the truck.
Front-end companions
FB14145 is a one-piece front bumper trim at 2.62 inches, and HT14145 is a one-piece hood vent trim. Together with the grille set they cover the nose of the truck. Check each listing for its finish.
Sides: watch the cab
- MI14145, eight-piece body molding inserts at 1.5 inches, CrewMax with 5.5' bed.
- MI14146, the same count and width, Double Cab with 6.5" bed.
- TH14145 (CrewMax) and TH14146 (Double Cab), six-piece lower rocker kits at 8.5 inches, on the cab only.
- WQ14145, four-piece wheel well accents at 1 inch, both cabs.
Rear
RT14145 is a tailgate accent listed at 2.5" width by 64" length. SGR14145 is a six-piece set of TUNDRA tailgate letter inserts, which its name lists as stainless letters. GC14145 is the gas door cover trim.
Clean the grille properly
A pickup grille holds a lot of bugs and road film. Wash it, rinse the recesses, and dry completely. Wipe each landing area with a residue-free cleaner, refolding the cloth each pass, until it's clean.
Fitting the pair
Tape both pieces up with liners on and compare to the photos from in front of the truck. Make sure both Tundra pieces sit evenly. Mark the ends, then peel and press one piece at a time, firmly along the whole length. Finish with a pass over the edges. Mild, dry, shaded conditions help. See the Installation tab.
Upkeep
Give the tape a few days before washing. Use mild soap and a soft cloth after that. Solid stainless can be polished back to a mirror if it dulls, and the grille underneath is left as it was.
Planning a bigger Tundra job
If you are fitting the bumper trim and hood vent trim too, mock up all of the front parts at once with painter's tape. Install from the top down: hood vent, then grille pieces, then bumper, so your hands never lean on fresh trim. Before ordering any side parts, confirm whether your truck is a CrewMax or Double Cab, because the rocker and molding kits are split that way in the data.
Tundra owners can quote SG14145 (UPC 757565501595) at 877-752-3811.
SG14145 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | SG14145 |
| UPC | 757565501595 |
| Part type | Front Grille Accent Trim |
| Pieces in kit | 2 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2014-2020 Toyota Tundra |
Fitment: SG14145
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Tundra | 2014-2020 | 2-door, 4-door, Pickup Truck |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2014-2020 Toyota Tundra
- FB14145: 1-piece Front Bumper Trim
- GC14145: 1-piece Gas Door Cover Trim
- HT14145: 1-piece Hood Vent Trim
- MI14145: 8-piece Body Molding Insert Trim Kit
- MI14146: 8-piece Body Molding Insert Trim Kit
- RT14145: 1-piece Tailgate Accent Trim
- SGR14145: 6-piece "TUNDRA" Tailgate Letter Inserts
- TH14145: 6-piece Rocker Panel Trim, Lower Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Front Grille Accent Trim
- Unpack all 2 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: SG14145 Front Grille Accent Trim
Which Tundra years fit SG14145?
2014 through 2020, 2-door and 4-door pickups.
How many pieces?
Two.
Does it matter if I have a CrewMax or Double Cab?
Not for this grille set. Some linked side parts are cab-specific; check those listings.
Is there a matching front bumper trim?
Yes, FB14145, listed at 2.62 inches.
Do I have to remove the grille?
No, 3M tape over the existing surface.
