Product Description
Toyota Tundra CrewMax 5.5' Bed Stainless Molding Insert Kit, 2014-2020 (MI14145)
MI14145 is cut for one specific Tundra configuration. The fitment row lists the Toyota Tundra from 2014 through 2020, tagged 4-door pickup, Crew Max, with a 5.5' bed. If your truck matches all of that, this eight-piece stainless molding insert kit is listed for it.
Cab and bed decide it
On this Tundra sheet, the molding insert kits are split by cab and bed length. Its twin, MI14146, is also an 8-piece kit at 1.5 inches for the same years, but it's tagged for the Double Cab with a 6.5 bed. The record doesn't state any other difference between the two, so pick by your truck: Crew Max with the short bed is MI14145, Double Cab with the long bed is MI14146. If you aren't sure of your configuration, call Quality Automotive Trims at 877-752-3811.
The kit
- Pieces: 8
- Width: 1.5 inches
- Polished 304 stainless steel at 26 gauge
- Produced in the USA
- 3M automotive-grade acrylic foam tape holds the eight inserts directly over the existing surface
There's no drilling involved.
More Tundra trim
This sheet links several other Tundra parts, all tagged 2-door and 4-door pickup:
- FB14145: 1-piece Front Bumper Trim at 2.62 inches
- GC14145: 1-piece Gas Door Cover Trim
- HT14145: 1-piece Hood Vent Trim
- RT14145: 1-piece Tailgate Accent Trim, 2.5 inches wide by 64 inches long
- SG14145: 2-piece Front Grille Accent Trim
- SGR14145: 6-piece "TUNDRA" Tailgate Letter Inserts, noted as stainless letters
TH14145, TH14146 and WQ14145 are listed as well. Each is sold separately, with material and mounting on its own page.
Fitting the strips
Eight pieces means a little planning. Lay them out next to the photos and label each liner with its position using a small strip of painter's tape. Check the existing moldings for damage and repair anything loose or cracked.
Clean the moldings with soap and water, dry, and wipe with rubbing alcohol. Dry-fit each strip with its liner on, aligning it with the molding edges, and mark the ends with painter's tape. Peel the liner, set the strip on the marks and press firmly along its full length. Do one piece at a time, then step back to check the line along the side of the truck.
The Installation tab has the full steps and the tape's temperature range. A dry, mild day works best, and the truck should stay out of rain and the first wash for a while.
Confirming your configuration
Your records list the cab style and the model year. For the bed, measure if you're unsure, or call with the year and cab and we'll help check which kit's row matches. Getting this right matters more than anything else on the page, because the twin kits share every other listed detail.
Care
Wash with mild soap and water and dry with a soft cloth. Skip abrasive pads and steel wool on polished stainless.
Questions about MI14145? Call 877-752-3811. Look through the MI14145 photos before starting. Toyota rows as cataloged are on the Fitment tab.
MI14145 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | MI14145 |
| UPC | 691821445721 |
| Part type | Body Molding Insert Trim Kit |
| Pieces in kit | 8 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 1.5" |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2014-2020 Toyota Tundra |
Fitment: MI14145
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Tundra | 2014-2020 | 4-door, Pickup Truck, Crew Max, 5.5' bed |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2014-2020 Toyota Tundra
- FB14145: 1-piece Front Bumper Trim
- GC14145: 1-piece Gas Door Cover Trim
- HT14145: 1-piece Hood Vent Trim
- MI14146: 8-piece Body Molding Insert Trim Kit
- RT14145: 1-piece Tailgate Accent Trim
- SG14145: 2-piece Front Grille Accent Trim
- SGR14145: 6-piece "TUNDRA" Tailgate Letter Inserts
- TH14145: 6-piece Rocker Panel Trim, Lower Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Body Molding Insert Trim Kit
- Unpack all 8 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: MI14145 Body Molding Insert Trim Kit
Which Tundra does MI14145 fit?
The 2014-2020 Toyota Tundra 4-door pickup, Crew Max, 5.5' bed.
I have a Double Cab. Which kit do I need?
MI14146 is tagged for the Double Cab with the 6.5 bed.
How wide are the strips?
1.5 inches.
What is it made of?
Polished 304 stainless steel, 26 gauge, made in the USA.
How does it mount?
With 3M automotive-grade acrylic foam tape, directly over the existing surface, no drilling.
