Product Description
Lincoln Continental 2017-2020 Stainless License Plate Bezel (LP57680)
LP57680 is a single polished stainless License Plate Bezel for the Lincoln Continental 4-door sedan. The title writes its years as 2017-20; the fitment row spells them out as 2017 through 2020. Both describe the same four model years, and the row carries no exclusions. If you own a Continental sedan from that window, this is the bezel the catalog lists for it.
The bezel is a small, self-contained piece, but the Continental has nine linked parts, and a few of their notes are worth knowing about before you build a plan.
The window package, WP57680, has ten pieces and a note saying it includes upper trim and pillar posts, but no window sills. Separate pillar kits are listed too: PP57680 with four pieces and PP57681 with six. The rocker option, TH57680, is a four-piece lower kit whose note gives a tapered width of 3.34" to 3.7" with a cut out for factory trim, spanning from the bottom of the door up. AT57680, a four-piece Body Side Molding Accent Trim, shows a width range of 0.25-1.25" with no explanation of the range. RD57680 is a one-piece Rear Deck Accent at 0.625", and GC57680 is a one-piece Gas Door Cover Trim. WQ57680 and WP57681 are linked by number only, so their details aren't on this sheet. Check every listing for its own finish and mounting.
The deck trim is the one that shares the rear view with the bezel. If you're ordering both, hold them in place together before either liner comes off and judge the pair from behind the sedan.
As for the bezel: one piece of 26-gauge 304 stainless steel, polished to a mirror finish, made in the USA. It isn't chrome-plated, so there's no coating to flake from its face. No dimensions are listed; the product photos are your reference, so compare them with your own plate area before you order.
It goes on with 3M automotive-grade acrylic foam tape, directly over the existing surface, with no drilling. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle. Since the adhesive bonds to the paint, inspect the finish near the plate and get chips or loose clear coat repaired before you start.
Preparation is quick. Remove leftover adhesive, wash and dry the area, then wipe it with rubbing alcohol. Stage the bezel with the liner on, check it from a few paces back, and mark it with painter's tape. Peel, align and press firmly all around. The Installation tab lists the steps and the tape's temperature range, and a dry, mild day is the right weather for it.
Check the Continental's year, and bring any plate frame into the dry fit. Mild soap and a soft cloth keep the polish clean. Mention LP57680 when you call Quality Automotive Trims at 877-752-3811.
It's one piece with no hardware, so it goes on quickly, and it sets the reference if the deck trim follows.
LP57680 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LP57680 |
| UPC | 691821400065 |
| Part type | License Plate Bezel |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2017-2020 Lincoln Continental |
Fitment: LP57680
| Vehicle | Years | Body style |
|---|---|---|
| Lincoln Continental | 2017-2020 | 4-door, Sedan |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2017-2020 Lincoln Continental
- PP57680: 4-piece Pillar Post Trim
- PP57681: 6-piece Pillar Post Trim
- TH57680: 4-piece Rocker Panel Trim, Lower Kit
- AT57680: 4-piece Body Side Molding Accent Trim
- RD57680: 1-piece Rear Deck Accent
- WP57680: 10-piece Window Trim Package
- GC57680: 1-piece Gas Door Cover Trim
- WQ57680: 6-piece Wheel Well Accent Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Plate Bezel
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LP57680 License Plate Bezel
Which Continental years does LP57680 fit?
2017 through 2020, 4-door sedan. The title's 2017-20 means the same range.
Does WP57680 include window sills?
No. Its note says it includes upper trim and pillar posts, no window sills.
Can I install the bezel with RD57680?
Both are listed for the sedan. Stage them together before installing either.
How does the bezel mount?
With 3M automotive-grade acrylic foam tape directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
What is it made of?
Polished 26-gauge 304 stainless steel, made in the USA.
