Product Description
Chevrolet Tahoe & GMC Yukon Four-Door 1995-1998 Full Rocker Kit, 10 Pieces, 6.25" (TH35196)
TH35196 is a ten-piece polished stainless steel Full Kit for the 4-door 1995-1998 Chevrolet Tahoe and GMC Yukon. It's 6.25" wide and "Spans from the bottom of the molding to the bottom of the door." The title names both; the Yukon is listed in the fitment row for the same years as the Tahoe.
Painted band versus molding strip
This sheet links two kits that cover different areas. TH35196 covers the painted band below the molding, 6.25" tall, all the way to the door bottom. TH35190 (4-door) and TH35189 (2-door) are 1.5" Insert Kits with the note "Side Molding," eight pieces each. The record doesn't say whether the insert and the Full Kit are designed to be used together. If you want both, call 877-752-3811 before ordering.
Four-door only
The fitment is tagged 4-door SUV. No full-height kit for the 2-door is linked to this record.
Confirm the 6.25"
Measure from the underside of the molding to the bottom edge of each door at front and rear. Readings around 6.25" agree with the record. Write them down; if any door is noticeably off, phone us with the numbers.
Ten pieces
No layout is given. Ten pieces for four doors means some doors or areas get more than one, and the record doesn't say which. Sort with the photos and label the liners.
Construction
Built for the 1995-1998 Tahoe and Yukon, ten 6.25" pieces of USA-made polished 26 gauge 304 stainless run from the molding to the door bottom on 3M automotive-grade acrylic foam tape. QAA states the tape will hold for a lifetime with no harm to the SUV.
Panel check
Over six inches of mirror finish shows whatever is underneath. Look along the lower doors in angled light for dents, ripples and rust blisters. Repair them before ordering, or at least before installing.
Preparing the surface
Wash, dry, then isopropyl alcohol across the full band, repeated until clean. Press along the molding and fix any loose sections; that's the line the steel will follow.
Installing
Dry-fit each piece. Peel a few inches, set the top edge under the molding, and press outward from the center as you pull the liner. A helper makes the longer pieces easier.
Afterward
Open each door to check for contact, especially where the front and rear doors meet. Keep later pieces consistent using measurements from the door edges, then step back to compare.
Supplies
Mild soap, isopropyl alcohol, a stack of lint-free cloths, painter's tape and a marker for labels, a tape measure, a plastic trim tool and a second pair of hands.
What to send when you call
Your year, Tahoe or Yukon, the molding-to-door-bottom readings from each door, and a photo of the side. If you're asking about pairing it with an insert kit, include a close photo of the molding too.
Care
Wait a day before washing. Then mild soap and soft cloths; no abrasive pads.
For the ten 6.25-inch Tahoe pieces, TH35196 (UPC 691821704156), call 877-752-3811.
TH35196 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH35196 |
| UPC | 691821704156 |
| Part type | Rocker Panel Trim, Full Kit |
| Pieces in kit | 10 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 6.25" |
| Coverage / notes | Spans from the bottom of the molding to the bottom of the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1995-1998 Chevrolet Tahoe and 1995-1998 GMC Yukon |
Fitment: TH35196
| Vehicle | Years | Body style |
|---|---|---|
| Chevrolet Tahoe | 1995-1998 | 4-door, SUV |
| GMC Yukon | 1995-1998 | 4-door, SUV |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the Chevrolet Tahoe
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Full Kit
- Unpack all 10 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH35196 Rocker Panel Trim, Full Kit
Does TH35196 fit a 2-door Tahoe?
It's tagged 4-door only.
Is it the same as TH35190?
No. TH35190 is a 1.5" Insert Kit for the side molding; TH35196 is a 6.25" Full Kit below the molding.
Does it fit the Yukon?
Yes, the 1995-1998 GMC Yukon 4-door is in the fitment.
How many pieces?
Ten.
