Product Description
1995-1998 Tahoe / Yukon Four-Door Side Molding Insert Kit, Eight Stainless Pieces, 1.5" (TH35190)
TH35190 fits the 4-door 1995-1998 Chevrolet Tahoe and GMC Yukon. The record lists an eight-piece polished stainless steel Insert Kit, 1.5" wide, with one note: "Side Molding."
Two kits for the four-door
The four-door has two linked choices with very different coverage:
- TH35190 (this page): Insert Kit, eight pieces, 1.5", "Side Molding."
- TH35196: Full Kit, ten pieces, 6.25", spanning from the bottom of the molding to the bottom of the door.
The insert is a narrow strip tied to the side molding; the Full Kit covers the painted band below it. The record doesn't say whether the two are meant to be used together, so if you're considering both, call 877-752-3811 first.
The two-door twin
TH35189 is the same specification for the 2-door. Make sure you order the kit tagged for your door count.
The Yukon
The title names the Tahoe and the GMC Yukon, and the fitment row lists the Yukon for the same 1995-1998 span.
Checking your molding
The record doesn't describe how the strip sits on the molding. Compare the product photos with your doors, and measure the molding's height. A face close to 1.5" is consistent with the record.
Material
Tahoe and Yukon owners get eight 1.5" molding inserts that QAA cuts in the USA from polished 26 gauge 304 stainless steel, pressed in with 3M automotive-grade acrylic foam tape over the existing surface. QAA states that tape will hold for a lifetime without harming the 1995-1998 SUV.
Molding prep
Trim protectants and old wax are the main obstacle to adhesion on a molding. Wash, rinse, dry, and then work over the molding with isopropyl alcohol on a clean cloth several times. Reattach any loose molding before installing.
Eight pieces, four doors
The record doesn't map them. Sort them with the photos and label each liner.
Installation
Dry-fit each piece and sight down its length to keep it straight along the molding. Peel a little liner, set one end, and press along as the liner comes away.
Lining up with the molding
The ends of each piece should meet the ends of the molding section beneath it, with even margins along the top and bottom. Check from a few feet back before you press; a strip this narrow makes a small misalignment easy to see.
Door gaps
After the door pieces are on, open and close each door and look where the strips meet across the gaps. They should line up from one door to the next.
Tools and timing
Mild soap, isopropyl alcohol, lint-free cloths, painter's tape and a marker, a tape measure, and a plastic trim tool. Choose a dry, mild day and keep the truck out of direct sun while you work, so the molding and the steel are at a moderate temperature.
Care
Wait a day before washing. After that, mild soap and a soft towel. Skip abrasive pads and harsh chemicals on the strips and the molding around them.
Eight 1.5-inch Tahoe and Yukon pieces: TH35190, UPC 691821474929. Call 877-752-3811.
TH35190 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH35190 |
| UPC | 691821474929 |
| Part type | Rocker Panel Trim, Insert Kit |
| Pieces in kit | 8 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 1.5" |
| Coverage / notes | Side Molding |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1995-1998 Chevrolet Tahoe and 1995-1998 GMC Yukon |
Fitment: TH35190
| Vehicle | Years | Body style |
|---|---|---|
| Chevrolet Tahoe | 1995-1998 | 4-door, SUV |
| GMC Yukon | 1995-1998 | 4-door, SUV |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the Chevrolet Tahoe
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Insert Kit
- Unpack all 8 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH35190 Rocker Panel Trim, Insert Kit
What's the difference between TH35190 and TH35196?
TH35190 is a 1.5" Insert Kit for the side molding. TH35196 is a 6.25" Full Kit spanning from the bottom of the molding to the bottom of the door.
Does it fit a 2-door Tahoe?
The 2-door version is TH35189.
Is the Yukon covered?
Yes, the 1995-1998 GMC Yukon 4-door is in the fitment.
How many pieces?
Eight.
