Product Description
Chevrolet Tahoe & GMC Yukon 2-Door 1995-1998 Rocker Insert Kit, 8 Pieces, 1.5" Side Molding (TH35189)
TH35189 is an Insert Kit for the 2-door 1995-1998 Chevrolet Tahoe and GMC Yukon. It's eight pieces of polished stainless steel, 1.5" wide, and the only placement note is "Side Molding." The title names both; the Yukon row has the same years as the Tahoe row.
An insert, not a band
There is no span note here, no "from the molding down" or "from the door bottom up." It's an Insert Kit with the note "Side Molding," which points to the side molding area rather than the painted panel below it. The record doesn't describe exactly how the 1.5" strip sits on or in the molding, so look closely at the photos and compare them with your truck. If the molding on your doors doesn't look like the one pictured, call 877-752-3811.
Two-door or four-door
TH35190 is the same Insert Kit specification, eight pieces at 1.5", tagged for the 4-door. This kit is tagged 2-door. The record doesn't explain how eight pieces map to each body, so don't swap them.
A taller option for the four-door
TH35196 is also linked. It's a ten-piece Full Kit, 6.25", that spans from the bottom of the molding to the bottom of the door, tagged 4-door only. No full-height kit is linked for the 2-door on this sheet.
Measuring the molding
Measure the height of the side molding on your doors. If the face you'd be covering is close to 1.5", that matches the record. If it's much different, phone first.
What it's made of
Each of the eight 1.5" molding inserts for the 2-door Tahoe and Yukon starts as polished 26 gauge 304 stainless steel in the USA and bonds with 3M automotive-grade acrylic foam tape. QAA states the tape will hold for a lifetime without harming the SUV.
Cleaning trim
Moldings hold dressing products and wax in their texture. Wash with soap, then wipe the molding several times with isopropyl alcohol until no residue comes off. Make sure the molding itself is firmly attached; press along it and reattach any loose sections first.
Placement
Label the eight pieces from the photos. Dry-fit each one with the liner on, check that it's centered on the molding along its length, then peel and press.
Keeping it straight
A narrow strip shows any wander along its length. Before pressing, sight along the door from the front corner and adjust the piece until its edges run parallel to the molding's edges. Then press from one end to the other without lifting.
Lining up with the molding
Line up the ends of each piece with the ends of the molding section it sits on, and keep the same spacing throughout.
Supplies
Soap, isopropyl alcohol, lint-free cloths, painter's tape for labels, a tape measure and a plastic tool. Work on a dry, mild day in the shade.
Care
Give the Tahoe or Yukon a day before washing; mild soap after.
For the Tahoe and Yukon kit TH35189 (UPC 691821378913), ring 877-752-3811.
TH35189 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH35189 |
| UPC | 691821378913 |
| Part type | Rocker Panel Trim, Insert Kit |
| Pieces in kit | 8 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 1.5" |
| Coverage / notes | Side Molding |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1995-1998 Chevrolet Tahoe and 1995-1998 GMC Yukon |
Fitment: TH35189
| Vehicle | Years | Body style |
|---|---|---|
| Chevrolet Tahoe | 1995-1998 | 2-door, SUV |
| GMC Yukon | 1995-1998 | 2-door, SUV |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the Chevrolet Tahoe
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Insert Kit
- Unpack all 8 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH35189 Rocker Panel Trim, Insert Kit
Does TH35189 fit the GMC Yukon?
Yes, the fitment lists the 1995-1998 GMC Yukon 2-door alongside the Tahoe.
Where does it go?
It's an Insert Kit with the note "Side Molding." Check the photos; call 877-752-3811 if your molding looks different.
Is there a 4-door version?
TH35190.
How wide is it?
1.5".
