Product Description
Eight-Piece 6.25" Rocker Kit for 1992-1998 Chevrolet Blazer, Tahoe & GMC Yukon with Flares & Molding (TH32183)
TH32183 is listed for three nameplates from 1992 to 1998: the Chevrolet Blazer, the Chevrolet Tahoe and the GMC Yukon, tagged "4-door, SUV, w/ Flares, w/ Molding." The title names all three. The kit is eight pieces of polished stainless steel, 6.25" wide, a Full Kit that "Spans from the bottom of the molding to the bottom of the door."
Two conditions: flares and molding
Both appear in the fitment. Your SUV needs to have flares and side molding for this record to describe it. The molding is also the kit's top reference line, so the two go together. If your vehicle lacks either one, call 877-752-3811 before you order.
How the fitment is written
The Blazer appears twice in each row, and a second row repeats the vehicles with only "w/ Flares, w/ Molding" and no body tag. The data doesn't explain the second row. If your vehicle's description doesn't match the first row, check with us.
What you're getting
- Eight pieces, Full Kit
- 6.25" from the molding to the bottom of the door
- Blazer/Tahoe/Yukon steel: polished 304, 26 gauge
- Flared-SUV set made in the USA
- Bonded to the flared SUV's surface as it is with 3M automotive-grade acrylic foam tape
QAA says the tape holding the Blazer, Tahoe and Yukon pieces will hold for a lifetime with no damage to the SUV's finish.
Eight pieces, four doors
The record doesn't assign positions. Two per door is one reading, but confirm with the photos before cleaning, and label the liners as you match them.
Near the flares
The ends of the pieces closest to the wheel openings are where flares come into play. During the dry-fit, make sure those ends stop where the photos show and don't press into the flare.
Cleaning
Wash and dry, then work isopropyl alcohol over the band until a fresh cloth shows nothing. Pay attention along the molding edge, where wax builds up.
Fitting each piece
Tuck the top edge under the molding with the liner on, check the bottom line, then peel and press from one end. Close the door gently after each.
No linked parts
Nothing is attached to this listing. Ask about other trim for these SUVs by phone.
Check the molding before you start
Since the steel's top edge sits under the molding, the molding's condition sets the result. Run a hand along it on each door. Loose ends, gaps or a warped section will show as a wavy line in the polished steel below, so reattach or repair them first.
Tools
Soap, isopropyl alcohol, plenty of clean cloths, painter's tape, a tape measure and a plastic tool for old wax along the molding edge.
Consistent spacing on the Blazer
Measure where each piece sits as you go and keep later pieces consistent, then check the line from the front bumper.
Conditions
A dry, mild day; about a day before washing; non-abrasive polish for upkeep.
Questions about fit or install? Quality Automotive Trims, 877-752-3811. SKU TH32183, UPC 691821335589.
TH32183 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH32183 |
| UPC | 691821335589 |
| Part type | Rocker Panel Trim, Full Kit |
| Pieces in kit | 8 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 6.25" |
| Coverage / notes | Spans from the bottom of the molding to the bottom of the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1992-1998 Chevrolet Blazer, 1992-1998 Chevrolet Tahoe and 1992-1998 GMC Yukon |
Fitment: TH32183
| Vehicle | Years | Body style |
|---|---|---|
| Chevrolet Blazer | 1992-1998 | 4-door, SUV, w/ Flares, w/ Molding |
| Chevrolet Tahoe | 1992-1998 | 4-door, SUV, w/ Flares, w/ Molding |
| GMC Yukon | 1992-1998 | 4-door, SUV, w/ Flares, w/ Molding |
| Chevrolet Blazer | 1992-1998 | w/ Flares, w/ Molding |
| Chevrolet Tahoe | 1992-1998 | w/ Flares, w/ Molding |
| GMC Yukon | 1992-1998 | w/ Flares, w/ Molding |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: Rocker Panel Trim, Full Kit
- Unpack all 8 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH32183 Rocker Panel Trim, Full Kit
Does TH32183 fit a Tahoe or Yukon?
Yes. The fitment lists the 1992-1998 Chevrolet Tahoe and GMC Yukon with the Blazer.
My SUV has no flares. Will it fit?
The fitment is tagged w/ Flares and w/ Molding. Call 877-752-3811.
How tall?
6.25", molding to door bottom.
How many pieces?
Eight.
