Product Description
Ford F-150 Regular Cab 6.5' Bed with Flares, 2004-2008: Lower Rocker Kit, 10 Pieces, Tapered 7.25"-7.5" (TH44310)
TH44310 is the Regular Cab kit for trucks with fender flares and the 6.5' bed: "2-door, Pickup Truck, Regular Cab, 6.5' bed, w/ Flares," 2004-2008 Ford F-150. The kit is ten polished stainless steel pieces with a 7.25" to 7.5" taper, and they start at the bottom of each door and rise.
Flares and wheel well trim
Because this truck has flares, the wheel-opening trim on the sheet is worth a careful read. WQ44308 is a four-piece wheel well accent trim, and WZ44309 is a four-piece wheel well fender trim molding with the note "2" Width-Short Style." Neither record says whether it suits a flared truck. If you want trim around the wheel openings as well, call 877-752-3811 with a photo of a wheel opening before ordering either one.
Regular Cab line-up
- 6.5' bed: TH44308 (no flares) or TH44310 (flares, this record).
- 8' bed: TH44309 (no flares) or TH44311 (flares).
All four are ten pieces with the same taper.
Molding insert
MI44310 is a ten-piece 1.5" body molding insert kit tagged Regular Cab, 6.5' bed, with flares.
Material
The ten Regular Cab 6.5' bed pieces are polished 26 gauge 304 stainless steel made in the USA. On this flared F-150 they bond over the existing door surface with 3M automotive-grade acrylic foam tape. Per QAA, the tape will hold for a lifetime without damage.
Ends near the flares
Dry-fit the pieces closest to the wheel openings first and check that each end sits neatly beside its flare before peeling.
Preview
Painter's tape seven and a half inches up from a door bottom shows the height. Look from a few steps back.
Taper
Which end is taller isn't stated. Match the product photos.
Prep
Repair chips along the door bottoms and near the flares. Wash, rinse, dry, then alcohol-wipe the band.
Install
Label the liners and dry-fit with painter's tape. Then peel a few inches of liner, set the bottom edge, and press along. Firm pressure to finish.
After
Swing each F-150 door wide, look down the length of the truck, then hold off washing for one day.
Even F-150 spacing
Measure each F-150 piece from the flare and door edges and keep it consistent.
A helper
A second pair of hands keeps tall pieces off the paint until you're ready to press.
Conditions and care
Install in dry, mild weather or a garage. Afterward, mild soap, a soft mitt and a towel dry.
Before ordering
Confirm the Regular Cab, the 6.5' bed, the flares and a 2004-2008 model year. If you're also buying wheel well trim, the insert kit or other linked parts, list them when you call so we can check everything together.
Door bottoms
Every piece starts at the bottom edge of a door, so inspect those edges for bubbling and chips and repair them first.
What to send
Year, bed length, and photos of the full side and a wheel opening.
This F-150 set is part number TH44310 with barcode UPC 691821404520; reach us at 877-752-3811.
TH44310 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH44310 |
| UPC | 691821404520 |
| Part type | Rocker Panel Trim, Lower Kit |
| Pieces in kit | 10 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 7.25" to 7.5" tapered |
| Coverage / notes | Spans from the bottom of the door UP to the specified width |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2004-2008 Ford F-150 |
Fitment: TH44310
| Vehicle | Years | Body style |
|---|---|---|
| Ford F-150 | 2004-2008 | 2-door, Pickup Truck, Regular Cab, 6.5' bed, w/ Flares |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2004-2008 Ford F-150
- DS44302: 4-piece Door Sill trim
- DS44316: 4-piece Door Sill trim
- GC44308: 1-piece Gas Door Cover Trim
- MC44308: 2-piece Mirror Cover Set
- MI44301: 10-piece Body Molding Insert Trim Kit
- MI44303: 10-piece Body Molding Insert Trim Kit
- MI44305: 12-piece Body Molding Insert Trim Kit
- MI44306: 12-piece Body Molding Insert Trim Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Lower Kit
- Unpack all 10 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH44310 Rocker Panel Trim, Lower Kit
What does TH44310 fit?
Ford F-150 Regular Cab, 6.5' bed, with flares, 2004-2008.
Is there a no-flares version?
TH44308.
Will the wheel well trim fit a flared truck?
The records don't say. Call 877-752-3811 with a photo.
How many pieces?
Ten, tapered 7.25" to 7.5".
