Product Description
Ford F-150 SuperCab 8' Bed with Flares (2004-2008): 10-Piece Lower Rocker Kit, 7.25"-7.5" Taper (TH44313)
TH44313 covers the longest SuperCab configuration in this group with flares: "4-door, Pickup Truck, Super Cab, 8' bed, w/ Flares," 2004-2008. Ten polished stainless steel pieces, tapered from 7.25" to 7.5", run up from the bottom edge of each door, per "Spans from the bottom of the door UP to the specified width."
Same count, longer bed
The SuperCab flared kits for the 5.5', 6.5' and 8' beds (TH44301, TH44303 and this one) are all ten pieces with the same taper. The record doesn't explain what changes with bed length. If you're unsure which bed you have, measure it or check the paperwork, and call 877-752-3811 if anything is unclear.
Rear-end trim on the sheet
A couple of the linked records are for the back of the truck rather than the sides: TL44309, a two-piece tail light bezel set, and the WZ44309 fender trim molding with the note "2" Width-Short Style." Each listing describes its own material, so read them before ordering alongside this kit.
Matching insert kit
MI44313 is a ten-piece 1.5" body molding insert kit tagged Super Cab, 8' bed, with flares, the same configuration as this record. Its tag lists the truck as two-door, while this record says four-door. The data doesn't say which is right; mention it if you order both.
Materials and mounting
The ten Super Cab 8' bed pieces for the flared F-150 are USA-made, polished 26 gauge 304 stainless steel, fixed over the existing door surface with 3M automotive-grade acrylic foam tape. According to QAA, the tape will hold for a lifetime without damage.
Flares and the trim ends
Pieces closest to the wheel openings deserve the most attention. Dry-fit them first and make sure each end sits neatly beside its flare before peeling any liner.
Picture the height
A strip of painter's tape seven and a half inches tall from a door bottom shows you the scale. On a long-bed truck, step well back to judge it.
Clean
Wash, rinse, and dry fully. Alcohol-wipe the band. Repair chips and dents.
Fitting the ten pieces
No layout is given. Sort with the photos and label each liner. Tape everything in place dry, check the taper direction, then peel and press one piece at a time. Finish with firm pressure.
Afterward
Open each door to confirm clearance. Look along the truck from the front. A day before washing.
Matching the sides
Measure each F-150 piece from the flare edges and door gaps and hold those readings.
Before ordering
SuperCab, 8' bed, flares, 2004-2008: if all four describe your truck, this is the record. If not, check the other kits in the group or call.
Weather
Work in dry, mild weather or a garage, with parts at room temperature.
A helper
With tall pieces on a long truck, a second person holding the far end off the paint keeps the tape clean and the line true.
F-150 set TH44313 (UPC 691821481194): ring Quality Automotive Trims at 877-752-3811.
TH44313 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH44313 |
| UPC | 691821481194 |
| Part type | Rocker Panel Trim, Lower Kit |
| Pieces in kit | 10 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 7.25" to 7.5" tapered |
| Coverage / notes | Spans from the bottom of the door UP to the specified width |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2004-2008 Ford F-150 |
Fitment: TH44313
| Vehicle | Years | Body style |
|---|---|---|
| Ford F-150 | 2004-2008 | 4-door, Pickup Truck, Super Cab, 8' bed, w/ Flares |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2004-2008 Ford F-150
- DS44302: 4-piece Door Sill trim
- DS44316: 4-piece Door Sill trim
- GC44308: 1-piece Gas Door Cover Trim
- MC44308: 2-piece Mirror Cover Set
- MI44301: 10-piece Body Molding Insert Trim Kit
- MI44303: 10-piece Body Molding Insert Trim Kit
- MI44305: 12-piece Body Molding Insert Trim Kit
- MI44306: 12-piece Body Molding Insert Trim Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Lower Kit
- Unpack all 10 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH44313 Rocker Panel Trim, Lower Kit
What does TH44313 fit?
Ford F-150 SuperCab, 8' bed, with flares, 2004-2008.
Is there a no-flares version linked?
The flared group doesn't link one; call 877-752-3811.
How wide is it?
Tapered, 7.25" to 7.5".
How many pieces?
Ten.
