Product Description
2004-2008 Ford F-150 Crew Cab, 6.5' Bed, with Flares: Lower Rocker Kit, 7.25"-7.5", 12 Pieces (TH44306)
TH44306 is the flared Crew Cab 6.5' bed kit for the 2004-2008 Ford F-150. The tag spells it out as "4-door, Pickup Truck, Crew Cab, 6.5' bed, with Flares." Twelve polished stainless steel pieces, tapered from 7.25" to 7.5", sit on the lower doors with their bottom edge at the door bottom.
"with Flares" versus "w/ Flares"
Every other flared kit in this group writes "w/ Flares"; this one writes "with Flares." The data shows no other difference, and both tags point to trucks with fender flares. If your flares are aftermarket or partial, send a photo of a wheel opening to 877-752-3811 before ordering.
Its no-flares twin
TH44305 is the same cab, bed, piece count and taper, tagged NO Flares. The flare tag is the only difference in the data.
Insert kit for the same truck
MI44306, twelve pieces at 1.5", carries the Crew Cab, 6.5' bed, with-flares tag. It's a body molding insert, so it sits on the molding rather than the lower doors. Read its listing for finish.
Material
- Crew Cab F-150 steel: high-grade polished 304, 26 gauge.
- Crew Cab trim built in America.
- Mounted on the Crew Cab as it is with 3M automotive-grade acrylic foam tape.
Per QAA, the tape under the twelve Crew Cab strips for F-150s with flares will hold for a lifetime and cause no harm to the paint.
Ends beside the flares
The pieces nearest the wheel openings need the most care. Dry-fit them first and check that each end meets its flare neatly before you peel any liner.
The taper
The width runs from 7.25" to 7.5", and the record doesn't say which end is the wider one, so dry-fit each piece to find its orientation.
Getting ready
Wash, rinse, dry. Wipe the band with isopropyl alcohol on all four doors. Repair chips, especially in the corners near the flares.
Twelve pieces
The data gives no layout. Label every liner and dry-fit the whole run with painter's tape.
Pressing on
Peel a few inches of liner, set the bottom edge, press along, and finish with firm pressure.
Wrap-up
Open every door. Sight along the truck. Hold off washing for a day.
Matching the sides
Measure from flare edges and door gaps to keep each position consistent.
Linked accessories
DS44316 (Crew Cab door sills), GC44308, MC44308, PP44307, WQ44308, WZ44309 and TL44309 appear on the sheet too. Check each listing.
Before ordering
Check the tag against your truck: Crew Cab, 6.5' bed, flares, and a 2004-2008 model year. If you're buying the insert kit, sills or other linked trim, list them when you call 877-752-3811 so we can confirm the whole order.
A helper
A second person keeps the far end of each tall piece off the paint, which makes a clean, straight install much easier.
Conditions and care
Install in dry, mild weather or a garage. Afterward, wash with mild soap and a soft mitt and dry the steel; rinse off salt in winter.
For the flared Crew Cab F-150 kit TH44306 (UPC 691821727315), phone 877-752-3811.
TH44306 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH44306 |
| UPC | 691821727315 |
| Part type | Rocker Panel Trim, Lower Kit |
| Pieces in kit | 12 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 7.25" to 7.5" tapered |
| Coverage / notes | Spans from the bottom of the door UP to the specified width |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2004-2008 Ford F-150 |
Fitment: TH44306
| Vehicle | Years | Body style |
|---|---|---|
| Ford F-150 | 2004-2008 | 4-door, Pickup Truck, Crew Cab, 6.5' bed, with Flares |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2004-2008 Ford F-150
- DS44302: 4-piece Door Sill trim
- DS44316: 4-piece Door Sill trim
- GC44308: 1-piece Gas Door Cover Trim
- MC44308: 2-piece Mirror Cover Set
- MI44301: 10-piece Body Molding Insert Trim Kit
- MI44303: 10-piece Body Molding Insert Trim Kit
- MI44305: 12-piece Body Molding Insert Trim Kit
- MI44306: 12-piece Body Molding Insert Trim Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Lower Kit
- Unpack all 12 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH44306 Rocker Panel Trim, Lower Kit
What does TH44306 fit?
Ford F-150 Crew Cab, 6.5' bed, with flares, 2004-2008.
Is "with Flares" the same as "w/ Flares"?
The data uses both spellings in this group; call 877-752-3811 if your flares are unusual.
How many pieces?
Twelve.
Is there a no-flares version?
TH44305.
