Product Description
2007-2008 Chevrolet Silverado Crew Cab Molding Insert Kit, 2.75", 4 Pieces (TH47184)
TH47184 fits the 2007-2008 Chevrolet Silverado Crew Cab, tagged "4-door, Pickup Truck, Crew Cab." Four polished stainless steel inserts, 2.75" wide, go on the side molding.
Crew Cab vs Extended Cab
The family has two four-piece kits at the same width. TH47184 is the Crew Cab; TH47185 is the Extended Cab, which the record tags "3-door." The data doesn't say how their pieces differ, only the cab. Check the cab name on your truck or its paperwork and order the matching record. If you're not sure, call 877-752-3811.
Regular cab version
TH47181 is the two-piece Regular Cab kit.
Four inserts
Four pieces and four doors. The record doesn't state one per door, so check the product photos and mark each liner with its position.
Molding requirement
Inserts depend on the molding. Make sure it's on every door, firmly attached, and close to 2.75" across.
Material
For the 2007-2008 Silverado Crew Cab, the four molding inserts are polished 26 gauge 304 stainless from the USA, fixed over the existing side molding with 3M automotive-grade acrylic foam tape. QAA states the tape will hold for a lifetime without damaging the truck.
Prep
Wash the molding, rinse, dry, and wipe with isopropyl alcohol to lift any dressing. Re-secure loose sections first.
Installing
Painter's tape holds each insert while you check it's centered. Peel a short length of liner at one end, set it, and work along as the liner comes away. Press firmly over the whole piece.
Line across the doors
On a crew cab the front and rear inserts meet at the door gap. They should be at the same height; check before committing the rear one.
After
Open each door fully. Wait a day before washing.
Care
Mild soap, soft cloth.
Weather
Dry and mild, or indoors.
Before ordering
A 2007-2008 Silverado Crew Cab with molding on all four doors. If that's your truck, this is the record.
Mock-up
A strip of painter's tape on one molding previews the finished line. Walk around the truck and look at it from the corners before you order.
What to send if you call
Year, cab name as shown on the truck or paperwork, and a photo of a full side with the molding visible.
About the door tags
The family's records tag the regular cab as two-door, the extended cab as "3-door," and the crew cab as four-door. The data doesn't explain the three-door tag. If your truck has four doors but isn't badged as a crew cab, or you're otherwise unsure which record fits, call 877-752-3811 before ordering rather than choosing by door count alone.
Molding condition
Press along every strip. A section that lifts at the ends or has a gap will show through the steel, so re-secure it before installing.
A helper
Someone steadying the far end of each insert helps you center it.
Insert spacing on the doors
Measure where each insert ends, taking the distance from the door edges, and use those numbers for the rest.
Silverado owners can quote the four 2.75-inch pieces, TH47184 (UPC 691821660513), at 877-752-3811.
TH47184 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH47184 |
| UPC | 691821660513 |
| Part type | Rocker Panel Trim, Insert Kit |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 2.75" |
| Coverage / notes | Side Molding |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2007-2008 Chevrolet Silverado |
Fitment: TH47184
| Vehicle | Years | Body style |
|---|---|---|
| Chevrolet Silverado | 2007-2008 | 4-door, Pickup Truck, Crew Cab |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2007-2008 Chevrolet Silverado
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Insert Kit
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH47184 Rocker Panel Trim, Insert Kit
What does TH47184 fit?
The Chevrolet Silverado Crew Cab, 2007-2008.
How is it different from TH47185?
TH47185 is for the Extended Cab. Both are four pieces at 2.75".
Where do they go?
On the side molding.
How many pieces?
Four.
