Product Description
Chevrolet Silverado Extended Cab 2007-2008 Molding Inserts, 2.75", 4 Pieces (TH47185)
TH47185 is the Extended Cab kit in the 2007-2008 Chevrolet Silverado insert family. The fitment tag reads "3-door, Pickup Truck, Extended Cab," and the kit is four polished stainless steel inserts, 2.75" wide, with the placement note "Side Molding."
The "3-door" tag
This is the only record in the family tagged with three doors. The data doesn't explain the count, and the Crew Cab record (TH47184) carries the same piece count and width with a four-door tag. Rather than going by doors, go by the cab name: if your Silverado is an Extended Cab from these years, this is the record. If the badge or paperwork says something else, or you aren't sure, call 877-752-3811 before ordering.
The family at a glance
- TH47181, Regular Cab, two pieces.
- TH47184, Crew Cab, four pieces.
- TH47185, Extended Cab, four pieces (this one).
All three are 2.75" and go on the molding.
Four inserts
The record doesn't say how the four inserts are assigned to the cab's doors. Lay them out with the product photos and label each liner before installing. If the photos don't make the layout clear, ask.
Your molding
An insert kit needs the molding: present on every door, secure, and close to 2.75" across. If any strip is missing, cracked or lifting, fix that first. The kit doesn't include molding.
Material
The four Silverado Extended Cab inserts are polished 26 gauge 304 stainless steel, made in the USA, and all of them bond to the existing side molding with 3M automotive-grade acrylic foam tape. QAA states the tape will hold for a lifetime without harming the 2007-2008 Chevrolet truck.
Cleaning
Wash the strips with soapy water, rinse, and dry. Wipe each with isopropyl alcohol until the cloth comes away clean; dressing and protectant are the main things to remove.
Setting the inserts
Center each insert on its strip with painter's tape and step back to check. Peel a short length of liner, set one end, and keep pressing along as the liner comes free. Finish with firm pressure from end to end. Where front and rear inserts meet at a door gap, make sure the heights match.
Clearance
Open each door fully after installing and watch the inserts at the gaps.
Care
A day before the first wash; mild soap and a soft cloth afterward.
Install conditions
Dry, mild weather or a garage, parts at room temperature.
What to send if you call
Year, the cab name shown on the truck or registration, and a photo of a full side with the molding visible. That's enough to confirm which of the three records fits.
Mock-up
Painter's tape along each molding previews the line before you order.
A helper
A second person steadying the far end of each insert makes centering easier.
Before ordering
Silverado Extended Cab, 2007 or 2008, molding on every door at about 2.75". If that matches, this is the record.
Silverado 2007-2008 owners can mention TH47185, UPC 691821334797, when dialing 877-752-3811.
TH47185 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH47185 |
| UPC | 691821334797 |
| Part type | Rocker Panel Trim, Insert Kit |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 2.75" |
| Coverage / notes | Side Molding |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2007-2008 Chevrolet Silverado |
Fitment: TH47185
| Vehicle | Years | Body style |
|---|---|---|
| Chevrolet Silverado | 2007-2008 | 3-door, Pickup Truck, Extended Cab |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2007-2008 Chevrolet Silverado
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Insert Kit
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH47185 Rocker Panel Trim, Insert Kit
What does TH47185 fit?
The Chevrolet Silverado Extended Cab, 2007-2008.
Why does the tag say 3-door?
The record doesn't explain it. Go by the cab name, or call 877-752-3811.
Where do they go?
On the side molding, 2.75" wide.
How many pieces?
Four.
