Product Description
GMC Sierra Extra Cab 2007-2013 Molding Insert Kit, 1.625", 4 Pieces (TH47285)
TH47285 is listed for the GMC Sierra "4-door, Pickup Truck, Extra Cab," model years 2007-2013. It's four polished stainless steel inserts, 1.625" wide, for the side molding.
"Extra Cab" is the record's term
The fitment uses "Extra Cab." The record doesn't define it or say how this cab differs from the Crew Cab that TH47284 covers with the same width and piece count. If your truck's badge or paperwork uses a different name for the cab, or you aren't sure which of the two you have, call 877-752-3811 before ordering. That's the one decision that matters with this kit.
The rest of the group
- TH47281: Regular Cab, two-door, two inserts.
- TH47284: Crew Cab, four-door, four inserts.
- TH47285: Extra Cab, four-door, four inserts (this record).
Assigning four pieces
The data doesn't say which insert goes on which door. Compare each insert with the product photos and number the liners before anything comes off.
Molding
The inserts sit on the molding, which must be present and secure on every door, with a face close to an inch and five-eighths. Not included with the kit.
Material
Sierra Extra Cab owners get four 1.625" molding inserts, cut in the USA from polished 26 gauge 304 stainless and secured with 3M automotive-grade acrylic foam tape. QAA says the tape will hold for a lifetime without harming the 2007-2013 GMC.
Prep
Soapy water, rinse, dry, then isopropyl alcohol on each strip.
Fitting
Center each insert with painter's tape, check the line, then peel a short length of liner, set one end and press along. Finish with firm pressure from end to end. Make sure the front and rear inserts meet the door gap at the same height.
After
Open each Sierra door to check clearance; wash a day later.
Care
Mild soap, mitt, towel dry.
Install conditions
A garage or dry, mild day.
What to send if you call
Year, a photo of a full side with all doors closed, and a photo of the cab badge if there is one.
Mock-up
A strip of painter's tape along each molding shows the finished line.
Before ordering
Three checks: the truck is a Sierra from 2007 to 2013, the cab matches the "Extra Cab" description rather than the Crew Cab, and the molding is on every door at about 1.625". If you can confirm all three, this is the record. If the cab question is open, a photo of the full side with the doors closed usually settles it; send it to 877-752-3811.
Molding condition
Press along every strip. Re-secure anything that lifts before installing.
Measuring between Sierra inserts
Measure each insert from the door edges to keep placement consistent.
A helper
A second person keeps each insert centered while you set it.
Across the gap
Where the front and rear inserts meet, check from a few feet back that both sit at the same height on the strip. A small step at the gap is easy to see on polished steel, so it is worth getting right before the rear insert is pressed down for good.
Extra Cab Sierra kit TH47285, UPC 691821407446. Quality Automotive Trims, 877-752-3811.
TH47285 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH47285 |
| UPC | 691821407446 |
| Part type | Rocker Panel Trim, Insert Kit |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 1.625" |
| Coverage / notes | Side Molding |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2007-2013 GMC Sierra |
Fitment: TH47285
| Vehicle | Years | Body style |
|---|---|---|
| GMC Sierra | 2007-2013 | 4-door, Pickup Truck, Extra Cab |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2007-2013 GMC Sierra
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Insert Kit
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH47285 Rocker Panel Trim, Insert Kit
What does TH47285 fit?
The GMC Sierra Extra Cab, 2007-2013.
What is an Extra Cab?
The record doesn't define it. Call 877-752-3811 if you're unsure which cab you have.
Where do they go?
On the side molding, 1.625" wide.
How many pieces?
Four.
