Product Description
1997-1999 Buick LeSabre Full Rocker Kit, 6 Pieces, 8.125"-8.625" Tapered (TH37564)
TH37564 is the bigger of the two LeSabre rocker kits QAA links for the 1997-1999 four-door sedan. It's a Full Kit: six pieces of polished stainless steel that span "from the bottom of the molding to the bottom of the door," tapering from 8.125" to 8.625".
Full Kit or Upper Kit?
The two linked options solve different problems, and choosing between them comes down to how much of the lower body you want covered.
- TH37564 (this kit): Full Kit, six pieces, 8.125"-8.625", bottom of the molding to the bottom of the door.
- TH37567: Upper Kit, ten pieces, 3", from the bottom of the molding down three inches, with a "Full Length" note that includes coverage from the wheel well to the bumper front and rear.
This kit fills the whole band below the molding on the doors. The Upper Kit is a narrow strip that runs the length of the car. The record doesn't say the two are meant to be combined, so treat them as alternatives unless you call and confirm otherwise.
Measure your band
Because this kit reaches all the way down, the distance between your molding and the door bottom has to match. Measure it at the front and rear of each door with a tape measure. Readings in the eight-and-an-eighth to eight-and-five-eighths range line up with this record; anything clearly outside it calls for a phone check at 877-752-3811.
The taper
The data gives two widths but doesn't say which end of the car is wider. The product photos show the shape of each piece.
Construction
The LeSabre's six wide pieces are USA-made, polished 26 gauge 304 stainless steel, mounted over the existing surface between molding and door bottom with 3M automotive-grade acrylic foam tape. QAA states the tape will hold for a lifetime without causing damage.
Six pieces, four doors
The record doesn't assign the six pieces to positions. Sort them with the photos, label each liner, and make sure you know where every piece goes before peeling anything.
Fitting a full-height panel
Wide pieces need a careful start. Hold each one with painter's tape so its top edge tucks against the molding and its bottom follows the door edge. Peel a short section of liner at one end, set it, then work across in small steps, pressing out any air as you go.
Prep
Wash, dry and wipe with isopropyl alcohol over the full band.
After installing
Open every door fully and confirm nothing binds. Let it sit a day before washing, then use mild soap.
Tools to gather
Tape measure, painter's tape, a marker for the liners, car soap, isopropyl alcohol, lint-free towels and a plastic trim tool for pressing near the molding. Pick a dry, mild day and keep the car in the shade.
When the molding isn't straight
The top edge of every piece meets the molding, so a molding that has sagged or lost a clip will throw the line off. Repair it before installing, and call 877-752-3811 if the gap you measure varies a lot from door to door.
For LeSabre kit TH37564 (UPC 691821462667), ring 877-752-3811.
TH37564 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH37564 |
| UPC | 691821462667 |
| Part type | Rocker Panel Trim, Full Kit |
| Pieces in kit | 6 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 8.125" to 8.625" tapered |
| Coverage / notes | Spans from the bottom of the molding to the bottom of the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1997-1999 Buick LeSabre |
Fitment: TH37564
| Vehicle | Years | Body style |
|---|---|---|
| Buick LeSabre | 1997-1999 | 4-door, Sedan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 1997-1999 Buick LeSabre
- TH37567: 10-piece Rocker Panel Trim, Upper Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Full Kit
- Unpack all 6 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH37564 Rocker Panel Trim, Full Kit
What does TH37564 fit?
1997-1999 Buick LeSabre 4-door sedan.
How much does it cover?
From the bottom of the molding to the bottom of the door, 8.125" to 8.625" tapered.
Is there a narrower option?
Yes, TH37567 is a 3" ten-piece Upper Kit for the same car.
How many pieces?
Six.
Can I use both kits together?
The record doesn't say. Call 877-752-3811 before ordering both.
