Product Description
1992-1996 Buick LeSabre LTD Full Rocker Kit, Six Pieces, 1.5" (TH32565)
TH32565 is the LeSabre kit tagged "LTD": six pieces of polished stainless steel for the 1992-1996 Buick LeSabre 4-door sedan, filed as a Full Kit at 1.5" with the note "Spans from the bottom of the molding to the bottom of the door." A Full Kit fills the space between those two edges, and here the record puts that space at an inch and a half.
Check the gap on your car
Since a Full Kit runs from the molding to the door bottom, its width only works if your car's gap matches. Measure from the underside of the molding to the bottom of a door, front and rear. If you get roughly one and a half inches, that lines up with the record. If you get something much larger, the kit may not be what you're picturing; call 877-752-3811 before ordering.
LTD vs Custom
The linked TH32563 is tagged Custom: six pieces, but an Upper Kit at 1.75", hanging from the molding. The two LeSabre kits differ in trim tag, kit type and width. The record doesn't explain what differs between the cars themselves. Confirm your trim from the paperwork, and phone us if it isn't listed as either.
Fitment
Buick LeSabre, 4-door sedan, LTD, 1992-1996.
Build and mount
The 1992-1996 LeSabre LTD kit is six 1.5" strips cut in the USA from polished 26 gauge 304 stainless, carried between molding and door bottom on 3M automotive-grade acrylic foam tape. QAA says that tape will hold for a lifetime with no harm to the Buick.
Six pieces
The record doesn't say where each goes. Match them to the doors using the photos and label the liners before you clean.
Fitting between two edges
The molding above and the door bottom below box each piece in. During the dry-fit, the steel should sit between them without riding over either one. If a piece is too tall for the gap or leaves a large space, stop and call.
Clean a narrow band well
Wash, dry, and wipe with isopropyl alcohol. A narrow strip has little tape area, so get right into the corner under the molding and along the door's bottom edge.
Pressing it on
Peel a short length of liner, line the piece up, and press. Continue along the piece, then go back over it with firm pressure from a cloth.
Door check
Open and close the door gently after each piece.
Start and end points
Mark where the first pieces start and end relative to the door gaps and keep the rest in line with them.
Supplies
Soap, isopropyl alcohol, clean cloths, painter's tape, a tape measure and a plastic tool for wax under the molding.
When to do it
Mild, dry day, in the shade if you can. Keep the car dry for about a day, then clean the steel with mild soap and a soft cloth. A non-abrasive metal polish handles water spots; skip scouring pads.
For the 1.5-inch LeSabre set TH32565 (UPC 691821417605), call Quality Automotive Trims at 877-752-3811.
TH32565 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH32565 |
| UPC | 691821417605 |
| Part type | Rocker Panel Trim, Full Kit |
| Pieces in kit | 6 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 1.5" |
| Coverage / notes | Spans from the bottom of the molding to the bottom of the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1992-1996 Buick LeSabre |
Fitment: TH32565
| Vehicle | Years | Body style |
|---|---|---|
| Buick LeSabre | 1992-1996 | 4-door, Sedan, LTD |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 1992-1996 Buick LeSabre
- TH32563: 6-piece Rocker Panel Trim, Upper Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Full Kit
- Unpack all 6 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH32565 Rocker Panel Trim, Full Kit
Does TH32565 fit a LeSabre Custom?
It's tagged LTD. TH32563 is the linked Custom kit.
How tall is it?
1.5", from the bottom of the molding to the bottom of the door.
How many pieces?
Six.
Which years?
1992-1996.
