Product Description
Buick LeSabre Custom 1992-1996 Upper Kit, Six Pieces, 1.75" Below the Molding (TH32563)
TH32563 is a slim Upper Kit for the 1992-1996 Buick LeSabre sedan tagged "Custom." Six pieces of polished stainless steel, 1.75" wide, follow the note "Spans from the bottom of the molding DOWN to the specified width." The result is a narrow bright strip directly under the molding.
Custom vs LTD
The LeSabre has two linked kits, and they're split by the trim tag. TH32563 is tagged Custom. TH32565 is tagged LTD and is a Full Kit at 1.5", from the molding to the bottom of the door. If your LeSabre is a Custom, this is the listing written for it. If it carries another trim name, or you don't know which you have, call 877-752-3811 before ordering.
Narrow and close to the molding
At one and three-quarter inches, the strip stays tucked close below the molding. Because the reference edge is the molding itself, the line is set for you; there's no measuring up from the ground.
Fitment
Buick LeSabre, 4-door sedan, Custom, 1992 through 1996.
Made from
The 1992-1996 LeSabre Custom kit is six 1.75" strips of polished 26 gauge 304 stainless from a USA shop, carried below the molding on 3M automotive-grade acrylic foam tape. QAA says the tape will hold for a lifetime without damaging the Buick.
Sorting six pieces
The record doesn't assign the six. Lay them out, compare their lengths and ends with the photos and your doors, and label each liner.
A thin strip needs clean edges
With under two inches of tape, the ends of each piece carry a lot of the load. Clean right up to the molding's lower edge, where wax gathers, and wipe the area twice with isopropyl alcohol.
Mounting
Set the top edge against the molding with the liner on and look along the side. Then peel the liner from one end and press as you go. A firm final pass with a cloth seats it.
Clearance
Open and close each door after its piece is on. The strip sits high, near the molding, so check the door's front and rear edges as well as the bottom, and stop if anything rubs.
Preview first
A strip of painter's tape 1.75" tall under the molding gives a fair idea of the finished look.
LeSabre, piece by piece
Note where each piece starts and ends relative to the door gaps and keep the rest consistent.
Supplies
Car soap, isopropyl alcohol, lint-free cloths, painter's tape for labels and a plastic tool.
Weather
Install on a dry, mild day. Keep it dry for about a day afterward.
Why the trim tag matters
QAA lists the Custom and LTD kits separately, with different widths and kit types. The record doesn't say what differs between the two cars, only that each kit is tagged for one. That's why it's worth confirming the trim name on your car's paperwork rather than assuming.
Upkeep
Mild soap and a soft cloth; a non-abrasive metal polish when the steel needs it.
The 1.75-inch LeSabre kit TH32563 has UPC 691821535514; Quality Automotive Trims answers at 877-752-3811.
TH32563 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH32563 |
| UPC | 691821535514 |
| Part type | Rocker Panel Trim, Upper Kit |
| Pieces in kit | 6 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 1.75" |
| Coverage / notes | Spans from the bottom of the molding DOWN to the specified width |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1992-1996 Buick LeSabre |
Fitment: TH32563
| Vehicle | Years | Body style |
|---|---|---|
| Buick LeSabre | 1992-1996 | 4-door, Sedan, Custom |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 1992-1996 Buick LeSabre
- TH32565: 6-piece Rocker Panel Trim, Full Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Upper Kit
- Unpack all 6 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH32563 Rocker Panel Trim, Upper Kit
Does TH32563 fit a LeSabre LTD?
It's tagged Custom. TH32565 is the linked kit tagged LTD.
How wide is it?
1.75", measured down from the bottom of the molding.
How many pieces?
Six.
Which years?
1992-1996.
