Product Description
Honda Prelude 1992-1996 Coupe Upper Rocker Kit TH92221, 6" With Bevel, 6 Pieces
TH92221 is a six-piece polished stainless steel Upper Kit for the 1992-1996 Honda Prelude 2-door coupe. The width bullet reads "6" Width, with bevel," and the pieces span "from the bottom of the molding DOWN to the specified width."
"With bevel"
The record says "with bevel" for the width but doesn't say what is beveled or how it affects the fit. The product photos are the best guide, and if the detail matters to you, call 877-752-3811 and we'll find out.
A single Prelude listing
No siblings are linked, and there's no length note, so the record doesn't say whether the six pieces stop at the wheel wells. Again, the photos show the layout.
6" from the molding
The trim starts at the lower edge of the molding and ends 6" below it. Before ordering, mark that line on both doors with masking tape and look along the side. If the line passes the door bottom at any point, send us a photo.
Material
Honda's 1992-1996 Prelude coupe takes six beveled 6" strips of USA-made polished 26 gauge 304 stainless, carried under the molding on 3M automotive-grade acrylic foam tape. QAA says the tape will hold for a lifetime with no damage to the car.
Preparing
Check that the molding is in place and secure along both doors; every piece's top edge sits against it. Then wash the 6" band below it, remove old wax with a wax-and-grease remover, and repair any chips or rust. Wipe with isopropyl alcohol just before fitting, and let it flash off.
Six pieces, two doors
The record doesn't say how the six divide between the doors and any panels beyond them. Spread the Prelude set on a towel, find each piece in the product photos, and write where it goes on its liner.
Fitting sequence
- Tape each piece up dry with painter's tape.
- Check the top meets the molding along its length.
- Open both doors fully.
- Look along the side from each end.
- Peel the liner in short sections, pressing as you go.
- Finish with firm pressure over the whole piece.
Matching the later pieces
Measure the first Prelude gaps and use them throughout.
When to fit it
A mild, dry day, working in shade. Hold off washing for a day.
Ordering
Send the year and tell us if the molding has ever been changed. Keep the box until every piece is on.
If the molding has been changed
The 6" line follows the molding, so if one has been replaced or refitted, check each door on its own and send us the figures with a photo. We would rather sort it out on the phone than have a piece end up off its line.
Tools
A tape measure, painter's tape, masking tape, microfiber cloths, wax-and-grease remover and isopropyl alcohol cover everything here.
Lay the pieces on a towel so the polished faces stay unmarked while you sort them.
Prelude kit TH92221 (UPC 691821356270): talk to Quality Automotive Trims at 877-752-3811.
TH92221 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH92221 |
| UPC | 691821356270 |
| Part type | Rocker Panel Trim, Upper Kit |
| Pieces in kit | 6 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 6" |
| Coverage / notes | With bevel; Spans from the bottom of the molding DOWN to the specified width |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1992-1996 Honda Prelude |
Fitment: TH92221
| Vehicle | Years | Body style |
|---|---|---|
| Honda Prelude | 1992-1996 | 2-door, Coupe |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: Rocker Panel Trim, Upper Kit
- Unpack all 6 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH92221 Rocker Panel Trim, Upper Kit
Which Prelude does TH92221 fit?
The 1992-1996 Honda Prelude 2-door coupe.
What does "with bevel" mean?
The record doesn't say. Check the photos or call 877-752-3811.
Where does it install?
From the bottom of the molding down 6".
How many pieces?
Six.
