Product Description
Jeep Commander 2006-2010 Full Rocker Kit, 7.833", 6 Pieces (TH46095)
TH46095 is a Full Kit for the Jeep Commander four-door SUV, model years 2006-2010. It has six polished stainless steel pieces, and the width is given as 7.833". The note describes the coverage: "Spans from the bottom of the molding to the bottom of the door."
A band with two edges
A Full Kit fills the whole space between the side molding and the door's lower edge. Two things decide the fit: the molding must be there, and the distance from its bottom to the door bottom should be close to the stated width. On the Commander that's a little under eight inches. Measure a front door and a rear door; if either is noticeably different, call 877-752-3811 before ordering.
The unusual width figure
The record gives the width to three decimal places, 7.833". It doesn't say whether that's measured at one point or is the same along the full length. If your measurement varies from one end of the door to the other, mention it when you call.
Six pieces, four doors
The data doesn't explain the split. Sort the pieces with the product photos and label each liner by position.
Molding insert in the same group
The linked MI46095 is a four-piece body molding insert trim kit, "With Logo Cut Out." It relates to the molding itself, while this kit sits below it. The record doesn't say whether the two are designed to go on together; ask if you want both.
Other linked Commander parts
LP46095 plate bezel, pillar post kits PP46095, PP46096, PP46097 and PP46098, RD46095 rear deck accent, roof rack trim RR46095 (two cut-outs for cross bars) and RR46096 (three cut-outs), WQ46095 wheel well accent trim, and WS46095 window sills.
Material
The 2006-2010 Commander gets six wide pieces cut in the USA from polished 26 gauge 304 stainless steel, set from molding to door bottom with 3M automotive-grade acrylic foam tape over the existing surface. According to QAA, that tape will hold for a lifetime with no damage to the Jeep.
Prep
Wash the lower doors and the corner under the molding, rinse and dry, then wipe the whole band with isopropyl alcohol. Re-secure loose molding first; it isn't included.
Install
- Dry-fit each piece between the molding and the door bottom with painter's tape.
- Peel a few inches of liner, align, and press along.
- Finish with firm pressure across the wide face.
After
Open each Commander door fully to check it clears. No wash for a day.
Care
Mild soap, a soft mitt, a towel dry.
Conditions
A garage or dry, mild weather for the Commander.
Helper
Tall pieces are easier with someone keeping the far end off the paint.
Before ordering
Check three things: a Commander from 2006 to 2010, side molding on every door, and close to eight inches of door between the molding and the bottom edge. If those all match, this is the record. If not, send photos of each side to 877-752-3811.
Commander spacing
Use the door gaps to keep the Commander pieces consistently placed.
Jeep Commander owners: TH46095, UPC 691821558643, Quality Automotive Trims, phone 877-752-3811.
TH46095 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH46095 |
| UPC | 691821558643 |
| Part type | Rocker Panel Trim, Full Kit |
| Pieces in kit | 6 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 7.833" |
| Coverage / notes | Spans from the bottom of the molding to the bottom of the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2006-2010 Jeep Commander |
Fitment: TH46095
| Vehicle | Years | Body style |
|---|---|---|
| Jeep Commander | 2006-2010 | 4-door, SUV |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2006-2010 Jeep Commander
- LP46095: 1-piece License Plate Bezel
- MI46095: 4-piece Molding Insert
- PP46095: 4-piece Pillar Post Trim
- PP46096: 6-piece Pillar Post Trim
- PP46097: 8-piece Pillar Post Trim
- PP46098: 10-piece Pillar Post Trim
- RD46095: 1-piece Rear Deck Accent
- RR46095: 2-piece Roof Rack Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Full Kit
- Unpack all 6 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH46095 Rocker Panel Trim, Full Kit
What does TH46095 fit?
The Jeep Commander four-door SUV, 2006-2010.
Where does it go?
From the bottom of the molding to the bottom of the door, 7.833" wide.
How many pieces?
Six.
Is the molding insert kit included?
No. MI46095 is a separate linked record. Call 877-752-3811 about using both.
