Product Description
Dodge Caravan & Plymouth Voyager 1994-1995 Rocker Trim, 7-Piece Full Kit, 6.5" (TH34892)
TH34892 is a seven-piece polished stainless steel Full Kit for the 1994-1995 Dodge Caravan and Plymouth Voyager minivans. It's 6.5" wide and "Spans from the bottom of the molding to the bottom of the door." Both fitment rows list the van with molding: one is tagged "3-door, Minivan, w/ Molding" and the other "4-door, Minivanw/ Molding" (the run-together spelling is in the catalog).
Two door counts, one kit
The same seven-piece kit is listed for a three-door and a four-door van. The record doesn't explain how seven pieces divide on either layout, or whether any piece goes unused on one of them. Because of that, owners of either version should compare their doors with the product photos, and if the shapes don't line up, call 877-752-3811 before installing anything.
The molding is a requirement
Both rows include "w/ Molding," and the span note starts at the bottom of the molding. If your van has no side molding, this kit's top edge has nothing to follow; phone us before ordering. If it does, press along it on every door and reattach any loose stretch, because the steel will follow whatever line the molding makes.
Plymouth owners
The title names the Dodge Caravan and the Plymouth Voyager, and both appear on the fitment rows for the same years, so this is the record for either.
Measuring
From the lower edge of the molding to the bottom of each door, measure at the front and rear. Readings close to 6.5" match the record.
What it's made of
The seven Caravan and Voyager pieces are polished 26 gauge 304 stainless steel produced in the USA, fitted over the existing surface below the molding with 3M automotive-grade acrylic foam tape. Per QAA, the tape will hold for a lifetime without harming the minivan.
No linked parts
Nothing else is linked to this listing, so pillar or other trim for these vans isn't described here.
What to tell us when you call
Which brand and year you have, whether it's the three-door or four-door van, your molding-to-door-bottom reading, and a photo of the side. That covers every question the record leaves open.
Prep
Lower doors on a van this age have usually seen plenty of road salt and wax. Wash, dry, and wipe with isopropyl alcohol until the cloth stays clean. Repair chips and let the paint cure first.
Sliding door
Before peeling the liner on the sliding door's piece, hold it in place and run the door through its full travel. It shouldn't touch anything along the track.
Install
Label the pieces using the photos. Dry-fit, peel a few inches, seat the top edge under the molding, and press toward the far end as the liner comes away. Firm pressure over the whole piece finishes it.
Supplies
Soap, alcohol, lint-free cloths, painter's tape for labels, a tape measure and a plastic tool.
Care
Give it a day before washing. Use mild soap and soft cloths, and a non-abrasive polish occasionally.
Caravan and Voyager owners can quote kit TH34892 and UPC 691821682164 at 877-752-3811.
TH34892 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH34892 |
| UPC | 691821682164 |
| Part type | Rocker Panel Trim, Full Kit |
| Pieces in kit | 7 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 6.5" |
| Coverage / notes | Spans from the bottom of the molding to the bottom of the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1994-1995 Dodge Caravan and 1994-1995 Plymouth Voyager |
Fitment: TH34892
| Vehicle | Years | Body style |
|---|---|---|
| Dodge Caravan | 1994-1995 | 3-door, Minivan, w/ Molding |
| Plymouth Voyager | 1994-1995 | 3-door, Minivan, w/ Molding |
| Dodge Caravan | 1994-1995 | 4-door, Minivanw/ Molding |
| Plymouth Voyager | 1994-1995 | 4-door, Minivanw/ Molding |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: Rocker Panel Trim, Full Kit
- Unpack all 7 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH34892 Rocker Panel Trim, Full Kit
Does TH34892 fit the Plymouth Voyager?
Yes, the fitment lists the Plymouth Voyager 1994-1995 alongside the Dodge Caravan.
Is it for the three-door or four-door van?
Both are listed, each with molding. The record doesn't explain how the seven pieces split; check the photos or call 877-752-3811.
My van has no side molding. Will it work?
Both fitment rows say "w/ Molding." Call before ordering.
How wide is it?
6.5".
