Product Description
Plymouth Grand Voyager 1994-1995 Rocker Kit, Seven Pieces, Listed at 1.5" (TH34897)
TH34897 is cataloged as a seven-piece polished stainless steel Full Kit for the 1994-1995 Plymouth Grand Voyager, tagged "3-doors, Mini Passenger Van, w/ Molding." The width is 1.5", and the span note reads "Spans from the bottom of the molding to the bottom of the door."
Check this width before you order
The span note describes a band from the molding all the way to the door bottom, and the record gives that band as 1.5". Whether those agree depends on the distance on your doors, and the record gives no further explanation. Here's what to do:
- Measure from the bottom of the molding to the bottom of each door.
- Look at the product photos for the shape of the pieces.
- If your measurement is much more than 1.5", call 877-752-3811 before buying.
Fitment
Plymouth Grand Voyager, 1994-1995, three-door passenger minivan with molding. The title writes the years as "1994-95." No other models or linked parts are listed.
Molding
The tag says "w/ Molding," and the steel is described as starting at the molding's bottom edge. A van without a side molding isn't covered by this record.
Seven pieces on three doors
The layout isn't described. Lay the pieces out, compare them with the photos, and mark each liner with its location before starting.
Steel and tape
Plymouth's 1994-1995 Grand Voyager with molding takes seven strips that QAA forms in the USA out of polished 26 gauge 304 stainless, carried on 3M automotive-grade acrylic foam tape. QAA states the tape will hold for a lifetime and won't mark the minivan.
Preparing the doors
Wash, dry, and wipe the band below the molding with isopropyl alcohol. On paint this old, check for chalky or flaking spots and repair them, since tape needs a sound surface. Press along the molding and reattach anything loose.
Sliding door test
Tape the sliding door's piece in place with the liner still on and open the door fully. If anything rubs, stop and call.
Applying
Peel a short length of liner, place the top edge against the molding, press, then continue along the piece. Finish with firm pressure everywhere, paying close attention to the ends and the top edge along the molding.
Spacing along the Grand Voyager
Measure the first Grand Voyager piece positions and use them as the guide for the rest.
Supplies
Mild soap, isopropyl alcohol, clean lint-free cloths, painter's tape and a marker, a tape measure, and a plastic trim tool for pressing edges. A second person makes the sliding door test easier.
Conditions
Work on a dry, mild day with the van in the shade, so the panels and the steel are both at a moderate temperature when the tape goes on.
What to send when you call
Your year, the molding-to-door-bottom reading from each door, and a photo of the lower side of the van.
Care
Wait a day before washing the Grand Voyager, then mild soap and a soft towel.
For Grand Voyager kit TH34897 (UPC 691821741083), ring 877-752-3811.
TH34897 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH34897 |
| UPC | 691821741083 |
| Part type | Rocker Panel Trim, Full Kit |
| Pieces in kit | 7 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 1.5" |
| Coverage / notes | Spans from the bottom of the molding to the bottom of the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1994-1995 Plymouth Grand Voyager |
Fitment: TH34897
| Vehicle | Years | Body style |
|---|---|---|
| Plymouth Grand Voyager | 1994-1995 | 3-doors, Mini Passenger Van, w/ Molding |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: Rocker Panel Trim, Full Kit
- Unpack all 7 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH34897 Rocker Panel Trim, Full Kit
How tall is TH34897?
The record lists 1.5" but also says it spans from the bottom of the molding to the bottom of the door. Measure your van and call 877-752-3811 before ordering.
Which van is it for?
1994-1995 Plymouth Grand Voyager, three-door passenger minivan with molding.
How many pieces?
Seven.
Are there linked parts?
No.
