Product Description
Plymouth Voyager 1991-1995 Seven-Piece Rocker Kit, 7.75", for Vans Without Molding (TH31893)
TH31893 is a seven-piece polished stainless steel Full Kit for the 1991-1995 Plymouth Voyager, tagged "3-doors Mini Passenger Van, NO Molding." It is listed at 7.75" with the note "Spans from the bottom of the molding to the bottom of the door." Those two pieces of data don't sit comfortably together, so read the next section before ordering.
No molding, but measured from the molding?
The fitment lists the van without molding, yet the span note uses the bottom of the molding as the top reference. The record doesn't explain which line the top of the steel follows on a van without one. We won't pick an answer. Look at the product photos, and call 877-752-3811 with a photo of your van's side so we can talk it through before you buy.
Fitment in short
Plymouth Voyager, 1991 through 1995, 3-door mini passenger van, without molding. The title doesn't mention the molding condition, so it's easy to miss.
Materials
The seven Voyager pieces are polished 26 gauge 304 stainless steel made in the USA, mounted over the existing surface with 3M automotive-grade acrylic foam tape on this 3-door van without molding. QAA states the tape will hold for a lifetime without causing damage.
Seven pieces
The record doesn't say how the seven are distributed, and an odd count on a three-door van won't split evenly. Lay them out, compare with the photos, and label each one before starting.
Setting a top line
Without a molding edge to butt against, use a guide. Once you've confirmed placement with us or the photos, run painter's tape where the top edge belongs and measure from the door bottom at several points so the line stays even.
Prep
Wash, rinse and dry the lower sides. Wipe with isopropyl alcohol until the cloth comes away clean. On a van of this age, test paint adhesion with painter's tape and repair lifting spots.
Placing each panel
Dry-fit with liners on. Peel a small section, align with your guide and the door bottom, press firmly, and continue. Run each door through its full travel, sliding or hinged, to check clearance.
What to send when you call
A photo of the full side of the van from a few steps back, a closer photo of one door's lower half, and the model year. With those we can look at the photos of this kit alongside your van and talk about where the top edge should land, rather than guessing from the record alone.
Supplies
Car soap, isopropyl alcohol, lint-free cloths, painter's tape, a tape measure and a plastic tool for residue. A helper makes the tall panels easier to hold square.
Not the Grand Voyager kit
QAA catalogs a separate seven-piece kit for the Grand Voyager. It isn't linked here, so confirm which nameplate you own.
Afterward
Dry, mild weather for install; about a day before washing; non-abrasive polish only.
Seven Voyager pieces ship as TH31893 with UPC 691821339976. Call 877-752-3811 before ordering if unsure.
TH31893 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH31893 |
| UPC | 691821339976 |
| Part type | Rocker Panel Trim, Full Kit |
| Pieces in kit | 7 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 7.75" |
| Coverage / notes | Spans from the bottom of the molding to the bottom of the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1991-1995 Plymouth Voyager |
Fitment: TH31893
| Vehicle | Years | Body style |
|---|---|---|
| Plymouth Voyager | 1991-1995 | 3-doors Mini Passenger Van, NO Molding |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: Rocker Panel Trim, Full Kit
- Unpack all 7 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH31893 Rocker Panel Trim, Full Kit
Does TH31893 fit a Voyager with side molding?
The fitment is tagged NO Molding. Call 877-752-3811 if your van has molding.
Where does the top edge go if there's no molding?
The record doesn't say. Check the photos and call us before ordering.
How tall is it?
7.75".
Does it fit a Grand Voyager?
No, the Grand Voyager has its own listing.
