Product Description
1991-1995 Plymouth Grand Voyager Rocker Trim, 7 Pieces, 7.75" (NO Molding Vans) (TH31894)
Grand Voyager owners: TH31894 is the kit tagged for your van, specifically the 1991-1995 Plymouth Grand Voyager, "3-doors Mini Passenger Van, NO Molding." Seven pieces of polished stainless steel make up the Full Kit, listed at 7.75" and described as spanning "from the bottom of the molding to the bottom of the door."
Grand, not standard
The standard Voyager has its own seven-piece kit in the catalog, not linked to this one. The two are separate listings for separate nameplates, so make sure the badge on your van matches before ordering. The record doesn't describe how the two kits differ.
The molding conflict
The fitment tag says NO Molding, while the span note measures from the bottom of the molding. On a van without molding, the record doesn't tell us where the top edge should sit. Rather than guess, check the photos and call 877-752-3811 with a picture of your van's side.
Spec list
Everything below comes straight from the catalog record for this van.
- Plymouth Grand Voyager, 1991-1995
- Seven pieces, Full Kit
- 7.75" width
- Voyager steel: polished 304 stainless, 26 gauge
- Grand Voyager trim made in America
- Fixed over the van's current surface with 3M automotive-grade acrylic foam tape
According to QAA, the tape fixing the seven Grand Voyager strips will hold for a lifetime and won't cause any damage to the van.
Measure first
Hold a tape measure at the bottom of a door and read up seven and three quarter inches. Note where it lands on each door. That tells you roughly where the top edge falls, and gives you something concrete to describe when you call.
Laying out seven
Positions aren't in the record. Match each piece to a door or panel using the photos and label the liners.
Clean and test
Soap, rinse, dry, then isopropyl alcohol over the whole band. Press and lift painter's tape on the old paint to make sure it's sound.
Guides and mounting
Mark the top line with painter's tape, checking it from the door bottom at several points. Dry-fit, then peel and press in short runs. Cycle every door afterward, including any sliding door, through its full movement.
Even spacing on the Grand Voyager
Measure the fitted pieces and keep the same heights on the rest.
Linked parts
None are attached to this listing. Ask us about other trim for this van when you call.
Tools
Soap and water, isopropyl alcohol, plenty of clean cloths, painter's tape, a tape measure and a plastic trim tool. A second person to hold the far end of a seven-and-three-quarter-inch panel square while you peel helps a lot.
When to stop
If a piece doesn't sit flat during the dry-fit, or the top edge wanders away from your guide line, stop before peeling any liner. Call with a photo; it's easier to sort out before the tape touches paint.
Weather and care
Install on a dry, mild day; wait about a day to wash; clean with mild soap and use non-abrasive polish.
Kit TH31894 for the Grand Voyager has UPC 691821590520. We take questions on 877-752-3811.
TH31894 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH31894 |
| UPC | 691821590520 |
| Part type | Rocker Panel Trim, Full Kit |
| Pieces in kit | 7 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 7.75" |
| Coverage / notes | Spans from the bottom of the molding to the bottom of the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1991-1995 Plymouth Grand Voyager |
Fitment: TH31894
| Vehicle | Years | Body style |
|---|---|---|
| Plymouth Grand Voyager | 1991-1995 | 3-doors Mini Passenger Van, NO Molding |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: Rocker Panel Trim, Full Kit
- Unpack all 7 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH31894 Rocker Panel Trim, Full Kit
Does TH31894 fit the regular Voyager?
No. It's tagged for the Grand Voyager. The Voyager has its own listing.
My Grand Voyager has molding. Will it fit?
The fitment is tagged NO Molding. Call 877-752-3811 first.
How many pieces?
Seven.
How tall is the steel?
7.75".
