Product Description
Dodge Stratus Sedan 1995-1998 Lower Rocker Trim, Eight Pieces, 5.25"-5.5" Tapered (TH35906)
TH35906 is an eight-piece polished stainless steel Lower Kit for the 1995-1998 Dodge Stratus 4-door sedan. It tapers gently from 5.25" to 5.5" and "Spans from the bottom of the door UP to the specified width." Nothing else is linked to this listing.
Bottom edge as the starting line
A Lower Kit is anchored at the bottom of the door. The steel's lower edge sits flush with it, and the band climbs a little over five inches. There's no molding involved in the record, so the top edge isn't following any existing trim; it simply ends where the width does. To see that line before you buy, measure up from the bottom edge on each door and mark 5.25" at one end and 5.5" at the other with painter's tape.
A quarter inch of taper
The change is small and the record doesn't say which end is the taller one. When you test-fit each piece with its liner on, the taper's direction will be obvious against the door.
Eight pieces for four doors
The record gives the count but no map. Compare every piece with the product photos and your doors, and write a position on its liner. A piece that doesn't match any door is a reason to call 877-752-3811 before going further.
What it is made of
The Stratus kit is eight polished 26 gauge 304 stainless pieces made in the USA, fixed over the existing door surface with 3M automotive-grade acrylic foam tape from the bottom of the door upward. Per QAA, the tape will hold for a lifetime without causing damage.
Look underneath first
Crouch down and look at the bottom edge of every door with a flashlight. That edge is where the steel's lower edge will sit, so any bubbling, flaking or chipped paint there needs repair and full curing before installation. The tape can only grip a sound surface.
Cleaning routine
- Wash with car soap and rinse.
- Dry fully, including the door bottoms.
- Alcohol-wipe the Stratus band.
- Repeat with a fresh cloth until it stays clean.
Applying
Hold the piece with its lower edge level with the door bottom. Peel a few inches of liner from one end, press, then work along the piece, removing liner as you go. A firm pass with the heel of your hand finishes it.
Across the gaps
With the front and rear door pieces done, the top edges should line up across the gap. Check from a few steps back.
Placing every Stratus piece
Keep each Stratus piece positioned consistently.
Aftercare
Leave it unwashed for a day. After that, soft cloths and mild soap.
What we need if you call
Your year, a note that it's the sedan, and a photo of the lower doors. If you've measured anything, include it; the numbers make the conversation quick.
Use mild soap and a soft towel, and keep scouring pads away from the polish.
Stratus owners can quote set TH35906 and UPC 691821722761 at 877-752-3811.
TH35906 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH35906 |
| UPC | 691821722761 |
| Part type | Rocker Panel Trim, Lower Kit |
| Pieces in kit | 8 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 5.25" to 5.5" tapered |
| Coverage / notes | Spans from the bottom of the door UP to the specified width |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1995-1998 Dodge Stratus |
Fitment: TH35906
| Vehicle | Years | Body style |
|---|---|---|
| Dodge Stratus | 1995-1998 | 4-door, Sedan |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: Rocker Panel Trim, Lower Kit
- Unpack all 8 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH35906 Rocker Panel Trim, Lower Kit
Where does TH35906 sit on the door?
It's a Lower Kit, from the bottom of the door up 5.25"-5.5".
Which Stratus?
1995-1998 Dodge Stratus, 4-door sedan.
How many pieces?
Eight.
Are there linked parts?
No.
