Product Description
Plymouth Grand Voyager SE 1996-2000 Rocker Panel Trim, Eight-Piece Full Kit, 6"-6.5" Tapered (TH35895)
TH35895 is listed for the Plymouth Grand Voyager SE, 1996-2000, tagged "4-door, Minivan, SE." The record describes eight pieces of polished stainless steel in a Full Kit, tapering from 6" to 6.5", spanning "from the bottom of the molding to the bottom of the door." The title gives the years as "1996-00." No parts are linked.
SE only
The fitment names one trim. If your Grand Voyager isn't an SE, the record doesn't cover it. Call 877-752-3811 with a measurement and a photo before ordering.
Six to six and a half
The width changes by half an inch along the pieces. Measure your van from the underside of the molding to the bottom of each door at both ends. Readings in that range agree with the record. The record doesn't say which end of each piece is taller; dry-fit to see.
Sliding door
If your van has a sliding door, test-fit the piece for it with the liner on and slide the door open and shut. No contact allowed.
Eight pieces
The layout isn't given. Match the Grand Voyager pieces to the photos and label each one.
Steel and tape
The eight Grand Voyager pieces are polished 26 gauge 304 stainless steel produced in the USA, applied over the existing finish with 3M automotive-grade acrylic foam tape. QAA states the tape will hold for a lifetime without damaging the minivan.
Older van, careful prep
Wash and dry. Wipe the band repeatedly with isopropyl alcohol; old wax is stubborn. Check for chips and flaking paint, and test any doubtful area with a piece of painter's tape. Fix problems before the steel goes on.
The molding line
Press along the molding on every door and reattach anything loose.
Install
Dry-fit, peel a few inches, seat the top edge, press outward while pulling the liner. Firm pressure over the whole piece at the end.
Afterward
A day before washing; gentle soap after.
What to send when you call
Your year, the trim from the van's badge or paperwork, readings from the molding to the bottom of each door, and photos of the van from both ends and in profile. With those we can compare your van with the record.
Grand Voyager joint spacing
Measure where each piece starts and ends and keep later positions consistent wherever the doors correspond.
Supplies
Mild soap, isopropyl alcohol, plenty of clean lint-free cloths, painter's tape and a marker for labels, a tape measure, a plastic trim tool, and a second person for the sliding door test. Pick a dry, mild day and work in shade.
Door gaps
Open each front door after its piece is down and watch the hinge side; the steel should clear the fender. Then look at how the ends line up across the gap.
If any of the eight pieces doesn't match a Grand Voyager door during the dry run, stop before its liner comes off and call us with the SKU and UPC below.
For the eight-piece Grand Voyager kit TH35895 (UPC 691821749584), call 877-752-3811.
TH35895 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH35895 |
| UPC | 691821749584 |
| Part type | Rocker Panel Trim, Full Kit |
| Pieces in kit | 8 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 6" to 6.5" tapered |
| Coverage / notes | Spans from the bottom of the molding to the bottom of the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1996-2000 Plymouth Grand Voyager |
Fitment: TH35895
| Vehicle | Years | Body style |
|---|---|---|
| Plymouth Grand Voyager | 1996-2000 | 4-door, Minivan, SE |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: Rocker Panel Trim, Full Kit
- Unpack all 8 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH35895 Rocker Panel Trim, Full Kit
Does TH35895 fit a Grand Voyager that isn't an SE?
It's tagged SE. Call 877-752-3811 before ordering for another trim.
How tall is it?
Tapered 6"-6.5", from the bottom of the molding to the bottom of the door.
Which years?
1996-2000.
How many pieces?
Eight.
