Product Description
Four-Piece Stainless Door Handle Surround for the 2006-2009 Hummer H3 (HV46313)
HV46313 is a four-piece door handle surround for the Hummer H3 4-door SUV, model years 2006 through 2009. A surround frames the area round a handle rather than covering it, giving the H3's doors a polished stainless outline. The kit is 26-gauge 304 stainless steel, made in the USA, and it installs with 3M automotive-grade acrylic foam tape directly over the existing surface.
Four pieces or five?
QAA lists two door handle surround kits for the H3: this four-piece version and HV46314, a five-piece version. Neither listing carries a note explaining the difference, and the catalog doesn't say what the fifth piece in HV46314 covers. We won't guess. The photos on both listings are the way to compare, and if they don't answer it, call us before ordering so we can check together.
Check the handles
Because a surround follows the outline of the handle area, it needs the factory handles in place. If a handle has been replaced with a different style, or there's damage around it, call first. Otherwise, compare the photos with your doors to make sure the outline matches.
Mounting
QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle. Nothing needs to be drilled or removed, and the handles keep working as before.
Install notes
Handle areas carry skin oils, lotion and grime, which can stop tape from sticking. Clean around each handle with soap and water, then rubbing alcohol, and let it dry. Sort the four surrounds against the photos, since front and rear may differ. Test each with its liner on and make sure it doesn't interfere with pulling the handle. Then peel, place and press firmly around the whole outline, holding pressure for a few seconds. Do one door at a time. Use the handles gently for the first day so the bond can set. The Installation tab covers temperature.
Related H3 parts
Along the doors, the H3 sheet also lists HV46304, a four-piece body molding insert kit at 1.75", HV46301, a four-piece lower rocker kit at 5.5" for the doors only, and HV46312, a two-piece pillar post trim noted "Rear Door." Check each listing's photos before combining.
Material and care
Grade 304 stainless polished to a mirror finish keeps its shine without plating, and the thin 26-gauge sheet sits close around the handle. Wash with mild soap, dry with a soft towel, and wipe fingerprints off with a microfiber cloth. Abrasive pads will scratch the polish.
Why surrounds
Handles are the part of a door you look at every time you get in. A polished outline around each handle draws the eye to a plain detail, and it pairs with other stainless along the H3's sides. With four pieces and simple prep, it's also a short job.
Fitment
One row: Hummer H3, 4-door SUV, 2006-2009, no exclusions. Check the H3's model year against that range first.
Deciding between the four- and five-piece H3 handle sets? Phone Quality Automotive Trims at 877-752-3811 with HV46313; the UPC is on Specs.
HV46313 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | HV46313 |
| UPC | 691821563845 |
| Part type | Door Handle Surround |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2006-2009 Hummer H3 |
Fitment: HV46313
| Vehicle | Years | Body style |
|---|---|---|
| Hummer H3 | 2006-2009 | 4-door, SUV |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2006-2009 Hummer H3
- HV46301: 4-piece Rocker Panel Trim, Lower Kit
- HV46302: 2-piece Hood Accent Trim
- HV46303: 9-piece Hood Vent Trim
- HV46304: 4-piece Body Molding Insert Trim Kit
- HV46305: 2-piece Marker Light Trim
- HV46306: 1-piece Grille Accent
- HV46307: 6-piece Letter Graphics
- HV46308: 2-piece Letter Graphics
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Door Handle Surround
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: HV46313 Door Handle Surround
What is HV46313?
A four-piece polished stainless door handle surround for the 2006-2009 Hummer H3 4-door SUV.
How is it different from HV46314?
HV46314 has five pieces. QAA doesn't explain what the additional piece covers, so compare photos or call 877-752-3811.
Does it cover the handles themselves?
It's a surround, framing the area around each handle. The photos show how it sits.
How does it attach?
With 3M automotive-grade acrylic foam tape. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Is drilling needed?
No.
