Product Description
20" Stainless Steel Emblems, Two-Piece Universal Set, Approx. 5" x 1.75" (SGR11004)
SGR11004 is listed as two polished stainless steel emblems reading 20", sold as a universal decal that fits all vehicles. Each is approximately 5" x 1.75", per the size note. The included-items line on this listing describes a different product, so read on before ordering. The record describes it as a universal decal, with each emblem approximately 5" by 1.75".
A mismatch in the record
The title and part name are 20", two pieces. A second note says Number "5," and the "What's included in the box?" line describes QAA's 1 piece stainless steel Number "5," approximately 3.25"x2.25," SGR#5. That line matches the number emblem listing. We won't pick between them. Check the product photos and call Quality Automotive Trims at 877-752-3811 to confirm the contents.
What the emblem shows
The part name is 20" and nothing more. The listing doesn't explain what the design depicts or what it's intended to mark. The photos show it.
Material
Made in the USA. High-quality polished 26 gauge 304 stainless steel, cut to perfection and polished to a mirror shine.
Tape
3M automotive-grade acrylic foam tape, for installation directly over the existing surface. QAA states it will hold for a lifetime without causing any damage to the surface of the vehicle.
Size and pair
Two emblems at roughly 5" by 1.75" each. That's a wide, low shape. Cut two paper strips to that size and hold them where you'd place the emblems to see how they look.
Where to put them
Any smooth, flat surface: a fender, tailgate, rear panel or trim piece. Avoid seams and curves, because a 5" steel strip needs full contact along its length.
Placing both emblems
If they go on separate panels, measure from matching reference points so both sit at the same height and distance from an edge.
Prep
Wash, dry and wipe with isopropyl alcohol. Let it evaporate fully.
Application
Use a painter's-tape guide, peel the liner, set the emblem, and press firmly from the middle outward. Apply on a warm surface and wait a day before washing.
Number five?
If you were looking for a number five, SGR#5 is QAA's separate listing for it.
Related listings
SGR11004 links to the digit emblems and to other universal emblems such as SGR11003 400HP, SGR11012 Small Bird and SGR11015 22" My Size. Many have similar note mix-ups, so read each listing carefully.
Care
Mild soap, soft cloth, dry. Non-abrasive polish restores haze.
Planning around the size
A 5" emblem is wide enough to need real flat space. Measure the panel you have in mind before ordering, and leave a margin around the emblem so it doesn't look crowded against an edge or another badge. If the only flat area is short, choose another spot. A quick template test answers the question in minutes, and if you're still unsure, send a photo to us and we'll help you decide where it would look best.
For the SGR11004 pair, with UPC 691821513543, reach Quality Automotive Trims on 877-752-3811.
SGR11004 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | SGR11004 |
| UPC | 691821513543 |
| Part type | 20" |
| Pieces in kit | 2 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | Universal Decal, each emblem is approximately 5"x1.75"; Number "5" |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | Universal Decal |
Fitment: SGR11004
| Vehicle | Years | Body style |
|---|---|---|
| Universal Decal | Fits ALL |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the Universal Decal
- SGR45370: 2-piece "500 Limited" decal
- SGR#0: 1-piece Number "0"
- SGR#1: 1-piece Number "1"
- SGR#2: 1-piece Number "2"
- SGR#3: 1-piece Number "3"
- SGR#4: 1-piece Number "4"
- SGR11001: 2-piece Trucker Girl
- SGR11002: 2-piece Texas
Check the body style on each listing; some kits are specific to one body style.
Installation tips: 20"
- Unpack all 2 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: SGR11004 20"
Does SGR11004 contain 20" emblems or a number five?
The title says 20", two pieces; the included-items line names a number five (SGR#5). Call 877-752-3811 to confirm.
How big are they?
Approximately 5" x 1.75" each.
Do they fit any vehicle?
Listed as universal, fits all. Use a smooth, flat surface.
How many pieces?
Two.
How do they attach?
3M automotive-grade acrylic foam tape.
