Product Description
"BOSTON" Letters and Clover Stainless Steel Emblem Set, 7 Pieces, Universal (SGR11020)
SGR11020 is QAA's "BOSTON" and Clover set: seven pieces of polished stainless steel, listed as a universal decal that fits all vehicles. The size note says each letter is approximately 2"x2" and the clover approximately 2.25" in diameter. The six letters of BOSTON plus one clover account for the seven pieces. Before ordering, read the note on the included-items line.
A conflicting contents line
The title, part name and piece count describe BOSTON letters and a clover, seven pieces. A second note reads "Small Bird," and the "What's included in the box?" line describes QAA's 2 piece stainless steel Small Bird, each approximately 4"x2," SGR11012. That can't match a seven-piece letter set. The record doesn't say which ships. Check the photos and call Quality Automotive Trims at 877-752-3811 before ordering.
Spelling it out
Seven separate pieces means you set each letter yourself. That gives freedom in spacing, and responsibility for it. The listing doesn't say where the clover goes relative to the word; the photos show QAA's arrangement.
Material and adhesive
QAA cuts all seven pieces in the USA from polished 26 gauge 304 stainless steel, and each mounts directly over the existing surface with 3M automotive-grade acrylic foam tape. QAA states that tape will hold for a lifetime with no damage to the paint.
How much room you need
Six letters at about 2" wide, plus the clover and gaps, need a flat run of paint roughly the width of a tailgate's flat section or a trunk lid. Measure your space first. Lay paper squares at about 2" by 2" along a strip of masking tape to see the total length.
Laying out a word
Run a level painter's-tape baseline. Set all seven pieces on it with the liners still on. Space letters evenly by eye first, then check with a ruler. Step back and adjust, especially around round letters like the O, which tend to look farther apart than they are.
Application
Clean the area with soap and water, dry it, and wipe with isopropyl alcohol. Mark each letter's position with a small tick on the baseline. Remove all but the first letter, then apply one at a time, pressing each firmly. Keep the surface warm; avoid washing for a day.
The clover
About 2.25" across, the clover is the same listed size as the linked SGR11019 Four Leaf Clover set. The record doesn't say the designs are identical.
Linked emblems
Other universal designs linked here include SGR11012 Small Bird, SGR11016 Handicap Symbol and SGR11018 Anchor, plus QAA's digit emblems. Several have mismatched notes; check each.
Care
Mild soap and a soft cloth. A soft brush helps between letters. Use a non-abrasive polish for haze.
For Boston fans
Polished steel letters read clearly from across a lot and keep their shine with washing.
Getting the word straight
A word made from separate letters shows any drift up or down more than a single emblem does. A long baseline of painter's tape, checked against a body line or the edge of the panel, keeps every letter level. Recheck after the first two letters.
Seven emblems, SGR11020, UPC 691821358519; dial 877-752-3811.
SGR11020 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | SGR11020 |
| UPC | 691821358519 |
| Part type | "BOSTON" and Clover |
| Pieces in kit | 7 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | Universal Decal, each letter is approximately 2"x2," Clover is approximately 2.25" in diameter; Small Bird |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | Universal Decal |
Fitment: SGR11020
| Vehicle | Years | Body style |
|---|---|---|
| Universal Decal | Fits ALL |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the Universal Decal
- SGR45370: 2-piece "500 Limited" decal
- SGR#0: 1-piece Number "0"
- SGR#1: 1-piece Number "1"
- SGR#2: 1-piece Number "2"
- SGR#3: 1-piece Number "3"
- SGR#4: 1-piece Number "4"
- SGR11001: 2-piece Trucker Girl
- SGR11002: 2-piece Texas
Check the body style on each listing; some kits are specific to one body style.
Installation tips: "BOSTON" and Clover
- Unpack all 7 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: SGR11020 "BOSTON" and Clover
Is SGR11020 the BOSTON set or a Small Bird emblem?
The title and piece count say BOSTON letters and a clover, seven pieces; the included-items line names Small Bird (SGR11012). Call 877-752-3811 to confirm.
How big are the letters?
Approximately 2"x2" each; the clover is about 2.25" in diameter.
How many pieces?
Seven.
Does it fit any vehicle?
It's listed as universal. You'll need a flat area long enough for the whole word.
What is it made of?
Polished 26 gauge 304 stainless steel, made in the USA.
