Product Description
Cadillac CT5 2020-2026 Stainless Front Accent Trim, Hood/Grille (HT60235)
HT60235 is a one-piece polished stainless accent for the Cadillac CT5 4-door Sedan, model years 2020 through 2026, seven years on a single Fitment row. Its catalog labeling is mixed, so read this before ordering. The part number carries the HT prefix used for hood trim, the catalog note reads "Hood Trim," yet the part type and category are listed as "Grille Accent." We've flagged the conflict. Either way, it's a front-end accent; the product photos show exactly where it sits, and if you're unsure, call us before ordering.
QAA cuts the CT5 grille accent from 26-gauge 304 stainless in the USA. A backing of 3M automotive-grade acrylic foam tape holds it on the grille. It installs directly over the existing surface, without drilling, and QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle. The catalog gives no width, so compare the photos with your car.
Before installing, check the surface where the accent will go and repair any chips, peeling clear coat or blisters; the tape needs a firm, clean surface. Wash with soapy water, rinse, dry fully and degrease. Dry-fit the accent with its liner on, confirm the shape matches the spot shown in the photos, and look at it from straight ahead to make sure it's level and centred. Mark the ends with painter's tape. Then peel the liner, set one end on its mark, lower the rest into place and press firmly along its length, with a second press after a minute. The Installation tab has more detail.
The CT5 sheet lists eight other parts for the sedan, and two of them have notes worth reading closely. TH60235 is a six-piece rocker kit at 2.25 to 3.5 inches that's labeled both an insert kit and a lower kit, with a separate note reading 2" and a description saying it goes into the body line near the bottom of the door up to the specified width. WQ60235, a six-piece wheel well accent set, is noted as cut to fit with the lower TH54250 or full TH54252 rocker kits sold separately, which are different part numbers from the CT5 rocker kit listed here. We've flagged both, so call before pairing them. The rest are simpler: PP60235, PP60236 and PP60237 are pillar post sets with four, six and eight pieces, the last including the rear triangle piece; RD60235 is a one-piece rear deck accent noted at .75"; and GC60235 is a one-piece gas door cover trim. LP60235 is listed by number only. Check each listing for its finish.
Polished 304 stainless gives the front of the CT5 a bright accent, and 26 gauge keeps it slim. Install on a dry, mild day and let the tape set overnight. Afterward, mild soap and a soft cloth keep it clean; avoid abrasive pads.
Questions about placement or the rocker and wheel well notes? Call Quality Automotive Trims at 877-752-3811 and mention HT60235. The UPC is on the Specs tab.
HT60235 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | HT60235 |
| UPC | 691821650026 |
| Part type | Grille Accent |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | Hood Trim |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2020-2026 Cadillac CT5 |
Fitment: HT60235
| Vehicle | Years | Body style |
|---|---|---|
| Cadillac CT5 | 2020-2026 | 4-door, Sedan |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2020-2026 Cadillac CT5
- PP60235: 4-piece Pillar Post Trim
- PP60236: 6-piece Pillar Post Trim
- PP60237: 8-piece Pillar Post Trim
- TH60235: 6-piece Rocker Panel Trim, Insert Kit
- RD60235: 1-piece Rear Bumper Accent
- GC60235: 1-piece Gas Door Cover Trim
- WQ60235: 6-piece Wheel Well Accent Trim
- LP60235: 1-piece License Plate Bezel
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Grille Accent
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: HT60235 Grille Accent
Is HT60235 hood trim or grille trim?
The catalog lists it both ways: the note says "Hood Trim" and the part type says "Grille Accent." Check the photos or call 877-752-3811.
Which CT5 years fit?
The 2020-2026 Cadillac CT5 4-door Sedan.
What is it made of?
Polished 304 stainless steel, 26 gauge, made in the USA.
Does it need drilling?
No. It installs directly over the existing surface with 3M automotive-grade acrylic foam tape.
How long does the tape hold?
QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Does WQ60235 work with the CT5 rocker kit?
Its note references TH54250 and TH54252, not the CT5 kit listed here. Call before ordering them together.
