Product Description
Stainless Marker Light Ring Set for the 2003-2007 Hummer H2, 4 Pieces (HV43024)
HV43024 is a four-piece polished stainless marker light trim for the Hummer H2 4-door SUV, listed for 2003 through 2007, and it comes with an installation instruction that sets it apart from most tape-on trim. QAA's note reads: "Must remove marker lights to install accent trim, then put marker lights back onto the vehicle." The catalog also calls it a "Ring set."
Plan to remove the marker lights
The general mounting description for this listing says the trim installs over the existing surface, but the specific note is clear that the marker lights come off first and go back on afterward. Follow the specific note. If you aren't comfortable removing and refitting the lights, ask someone who is, or call us before ordering so we can talk through what's involved. The catalog doesn't describe the removal steps, so we won't guess at them here.
How a ring set fits
Ring trim frames a shape rather than covering it, so each stainless ring outlines a marker light. With four pieces, the photos will show you which ring goes with which light. Compare them with your H2 before ordering, especially if any marker light has been replaced.
Years
The fitment row covers the Hummer H2, 4-door SUV, 2003-2007, five model years. If your truck is newer than 2007, this listing doesn't include it; call and we'll check. Make sure your H2 falls within that span.
Mounting
On the 2003-2007 H2, each marker light ring mounts with 3M automotive-grade acrylic foam tape. According to QAA, it will hold for a lifetime without damaging the Hummer's surface.
With a light removed, the mounting area is exposed and easy to clean. Wash it, wipe with rubbing alcohol, and let it dry completely. Test the ring in place with the liner on, and check that the light will sit correctly once it's reinstalled. Then peel, press the ring firmly all the way around, and refit the light. Work on one marker light at a time so parts don't get mixed up. Once all four are done, check that every light works. The Installation tab has general guidance on temperature and cure time.
Other 2003-2007 H2 details
This listing is linked with HV43021, a four-piece door handle accent; HV43022, a one-piece gas cap accent trim; and HV43023, a two-piece mirror accent also noted "Ring set." Check each listing before ordering.
Why trim the marker lights
Marker lights are small, but a bright outline around each one catches the eye. Rings around them tie the lights in with other stainless on the H2, and with only four pieces the job is quick. Budget unhurried time for the removal and refit, which is the longer part of the job.
The steel
All four rings are 26-gauge 304 stainless steel, polished to a mirror finish and made in the USA. Care is mild soap, water and a soft towel; skip abrasive pads.
Questions about removing the lights or about fit? Call Quality Automotive Trims at 877-752-3811 and mention HV43024. The UPC is on the Specs tab.
HV43024 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | HV43024 |
| UPC | 691821460885 |
| Part type | Marker Light Trim |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | Ring set; Note: Must remove marker lights to install accent trim, then put marker lights back onto the vehicle |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2003-2007 Hummer H2 |
Fitment: HV43024
| Vehicle | Years | Body style |
|---|---|---|
| Hummer H2 | 2003-2007 | 4-door, SUV |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2003-2007 Hummer H2
- HV43022: 1-piece Gas Cap Accent Trim
- HV43023: 2-piece Mirror Accent Trim
- HV43021: 4-piece Door Handle Accent Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Marker Light Trim
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: HV43024 Marker Light Trim
Do I need to remove the marker lights to install HV43024?
Yes. QAA notes: "Must remove marker lights to install accent trim, then put marker lights back onto the vehicle."
Which H2 years does it fit?
2003-2007, 4-door SUV.
How many pieces are included?
Four, in polished 26-gauge 304 stainless steel.
What holds the rings on?
3M automotive-grade acrylic foam tape. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
What if I'm not comfortable removing the lights?
Call 877-752-3811 before ordering so we can talk it through.
