Product Description
Chevrolet Cobalt 2005-2010 Coupe Two-Cover Pillar Post Trim (PP48122)
PP48122 is the two-door member of the Cobalt pillar range: a pair of polished stainless pillar post covers for the Chevrolet Cobalt coupe. It's listed for 2005-2010 and priced at $56.99. Both covers are 26 gauge 304 stainless steel, made in the USA. The fitment row reads Chevrolet Cobalt 2005-2010, tagged 2-door, Coupe.
Coupe only. The record ties this pair to the two-door Cobalt coupe across six model years. The two-piece coupe set shares the 2005-2010 Cobalt window. The four-door sedan has its own linked sets, PP48120 with four covers and PP48121 with six, both tagged 4-door, Sedan. If you're not certain which body you have, or the year sits outside 2005 to 2010, call us before ordering.
Two shapes. The listing doesn't say which posts the pair covers and gives no widths or notes. Look at the product photos, then stand by the coupe and hold each image up to the post it seems to fit, so you know where both go before you peel anything.
Reach us. Quality Automotive Trims picks up on 877-752-3811. Quote PP48122 and your year and mention it's the coupe, and we'll look at the two shapes with you.
Purely decorative. Each cover sits on a post beside the side glass. The coupe's doors, windows and seals work as they always have. 304 stainless resists corrosion through the alloy; there's no chrome plating.
Mounting. Both covers mount with 3M automotive-grade acrylic foam tape onto the existing paint or trim of the posts. There's no drilling into the Cobalt and no trim removal. Read the Installation tab for temperatures and cure time.
Two posts to prepare. Strip wax and polish from each, and repair any chalking, crazed or flaking paint first, since the tape will only grip as firmly as that coat allows. Wash with car soap, rinse, dry thoroughly, then wipe with rubbing alcohol on a lint-free cloth, refolding until a clean side stays clean. Feel each post for dents.
What you'll use. A few strips of low-tack painter's tape for the outlines, a bottle of rubbing alcohol, a couple of lint-free cloths and a bucket of soapy water. With only two covers to fit on the coupe, the whole job is a short one once the posts are prepared.
Fitting the pair. Choose a dry, still day and keep the car in shade. Check the two against the gallery and contact us if either is bent. With its liner on, lay the first cover on its post, slide it until the margin is even on every edge and run tape around it. Peel the liner, set the cover back inside the tape and press firmly along its length and both edges. Do the same with the second cover.
If one won't lie flat. Should either cover leave a gap at an end or rock when touched, don't push harder. Keep its liner on and phone 877-752-3811 so we can help. After the tape has cured, the pair wash with car soap and water and dry with a soft towel.
PP48122 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | PP48122 |
| UPC | 691821440696 |
| Part type | Pillar Post Trim |
| Pieces in kit | 2 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2005-2010 Chevrolet Cobalt |
Fitment: PP48122
| Vehicle | Years | Body style |
|---|---|---|
| Chevrolet Cobalt | 2005-2010 | 2-door, Coupe |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2005-2010 Chevrolet Cobalt
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Pillar Post Trim
- Unpack all 2 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: PP48122 Pillar Post Trim
What does PP48122 fit?
The Chevrolet Cobalt 2005-2010, tagged 2-door, Coupe.
Is there a set for the Cobalt sedan?
Yes. PP48120 (four covers) and PP48121 (six) are tagged 4-door, Sedan.
Which posts do the two cover?
The listing doesn't name them. See the gallery or call 877-752-3811.
Do I need to drill?
No. The covers mount with 3M automotive-grade acrylic foam tape directly over the existing surface.
How do I clean them?
Car soap and water after curing, then a soft towel.
