Product Description
PB16805: Stainless Porthole Surround Ring Pair for the 2016-2020 Kia Optima Sedan
For the 2016-2020 Kia Optima 4-door sedan, PB16805 supplies two polished stainless porthole accent pieces. The catalog note is the same one shoppers should read twice: "Surround Ring only, No center strip." In other words, these pieces frame the porthole area, and nothing in the set runs across its middle. The listing doesn't give a ring size, so look at the product photos to see the shape before ordering.
Will it fit? The single fitment row reads Kia Optima, 2016-2020, 4-door, sedan, and the title matches. Find your Optima's year; PB16805 covers 2016 to 2020. If your Optima is from the earlier years, this pair isn't tagged for it. Unsure about anything? Call Quality Automotive Trims at 877-752-3811 and mention PB16805. Is there something about these Optima accents you're unsure of? A call to 877-752-3811 will clear it up. Optima surface prep is explained under Installation.
What it's made of. 26 gauge 304 stainless steel, polished, made in the USA. Two pieces in the set.
How it goes on. 3M automotive-grade acrylic foam tape, installed directly over the existing surface. No drilling. Fit questions on the 2016-2020 Optima are welcome on that line too.
Install notes. Clean the area with soapy water, dry it, and wipe it with rubbing alcohol; wait until it's fully dry. Hold one ring in place with its liner still on and look at it head-on. The goal is an even margin around the whole ring. Once you have it, put small pieces of painter's tape at a few points around the outside to record the spot. Peel the liner, place the ring inside your marks, and press around the entire ring with your fingertips. Then do the second one and compare the pair from a short distance. Install within the temperature range in the Installation tab and let the tape cure before the first wash.
A good afternoon project with other trim. The sheet shows several more stainless options for this Optima if you'd like more of it. Lower down, AT16805 is a 2-piece body side molding accent trim at 1 inch noted "On the Rocker Acccent" (the catalog has the spelling with three c's), and TH16805 is a 4-piece lower rocker panel kit tapering from 1.375" to 1.625" that installs below the door, on the rocker. Up top, RI16805 is a 2-piece roof insert trim at 0.625 inches. PP16805 and PP16806 are pillar post sets with 4 and 6 pieces. GC16805 is a 1-piece gas door cover trim, and RD16805 a 1-piece rear deck accent at 1.2 inches. Three more parts are listed by number only. Each one has its own listing and photos, so confirm fitment there.
Why start with the rings? They're small, they take little time, and they let you practice the clean, dry-fit, mark and press routine on two pieces before you move on to a longer strip kit where a mistake would be more visible.
Care. Wash with mild soap and water and dry with a soft cloth. Avoid abrasive pads and steel wool.
PB16805 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | PB16805 |
| UPC | 691821444526 |
| Part type | Porthole Accent Trim |
| Pieces in kit | 2 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | Surround Ring only, No center strip |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2016-2020 Kia Optima |
Fitment: PB16805
| Vehicle | Years | Body style |
|---|---|---|
| Kia Optima | 2016-2020 | 4-door, Sedan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2016-2020 Kia Optima
- PP16805: 4-piece Pillar Post Trim
- PP16806: 6-piece Pillar Post Trim
- AT16805: 2-piece Body Side Molding Accent Trim
- GC16805: 1-piece Gas Door Cover Trim
- RD16805: 1-piece Rear Deck Accent
- RI16805: 2-piece Roof Insert Trim
- TH16805: 4-piece Rocker Panel Trim, Lower Kit
- WS16805: 6-piece Window Sill Trim Set
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Porthole Accent Trim
- Unpack all 2 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: PB16805 Porthole Accent Trim
Is there a center strip with PB16805?
No. The note says surround ring only, no center strip.
Which Optima years are listed?
2016-2020, 4-door sedan.
How many pieces are in the set?
Two.
Is any drilling required?
No. It mounts with 3M automotive-grade acrylic foam tape directly over the existing surface.
Can I see the ring size?
No size is listed. Check the photos or call 877-752-3811.
