Product Description
Lincoln MKX 2010-2014 Rear Deck Accent, 1.13-Inch Stainless Steel (RD47610)
RD47610 is a single bright strip for the back of the Lincoln MKX, model years 2010 through 2014, 4-door SUV. It is 1.13 inches wide, made from mirror-polished 304 stainless steel in the USA, and mounts with 3M adhesive tape.
Five MKX years
2010, 2011, 2012, 2013, 2014. Check the year on your registration if you're not certain.
Liftgate, not trunk
The catalog name is rear deck accent. The MKX is an SUV, so the strip goes on its rear liftgate. The product photos show the placement.
Nothing else linked
This listing has no sibling parts in the data. There is no bezel, handle trim, or pillar kit tied to this MKX record. The deck strip is a complete order on its own; if you want to ask about other trim for the vehicle, call.
How wide is 1.13 inches?
Just over an inch. Lay a matching width of painter's tape across the gate where the photos put the strip and see whether you like the proportion.
What it's made of
26-gauge 304 stainless, polished to a mirror. Since the finish is the steel itself, there's no coating to peel or fade away.
What holds it
The MKX accent bonds over the existing liftgate surface with 3M automotive-grade acrylic foam tape, which QAA says will hold for a lifetime without harming the Lincoln.
Surface prep
An MKX from these years has seen plenty of wax, so clean well. Wash the gate, let it dry, and clean the strip's footprint with a residue-free product until the cloth comes back clean. Any peeling clearcoat should be repaired first, because the tape only holds as well as the paint does.
Lining it up
Leave the liner on and test the position. Measure from each end to the edges of the gate, make the two numbers match, and run painter's tape along the line as a guide. Pick a dry day that isn't too hot or cold.
Pressing
Peel the liner, set the strip against the tape guide, and press from the center toward both ends with steady pressure. The Installation tab covers it step by step.
Care
Skip washing for a few days. After that, mild soap and a soft cloth; dry it when done.
Purpose
A deck accent is decoration: a polished line on the rear of the vehicle. It doesn't replace any factory part.
Why stainless
Solid stainless shows the same steel even if lightly scuffed, and the mirror polish is part of the metal rather than a layer applied on top.
Before ordering
Year, body, and the tape test. That's all it takes. If your liftgate has aftermarket badges or accessories near where the strip goes, compare carefully with the photos, since the data describes the strip, not every gate setup.
Weather for the install
Foam tape bonds best when the surface is neither cold nor hot. A garage or a shaded, dry afternoon works well.
Part details
2010-2014 MKX accent RD47610 (UPC 691821403929): Quality Automotive Trims at 877-752-3811.
RD47610 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | RD47610 |
| UPC | 691821403929 |
| Part type | Rear Deck Accent |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 1.13" |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2010-2014 Lincoln MKX |
Fitment: RD47610
| Vehicle | Years | Body style |
|---|---|---|
| Lincoln MKX | 2010-2014 | 4-door, SUV |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: Rear Deck Accent
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: RD47610 Rear Deck Accent
Which MKX years does RD47610 fit?
2010 through 2014, 4-door SUV.
How wide is the strip?
1.13 inches.
Where does it mount?
On the rear liftgate.
Are there matching parts?
None are linked to this listing in the data.
Does any liftgate trim have to come off?
No. It uses 3M tape.
