Product Description
Lincoln MKX 2007-2010 Stainless Trunk Hatch Accent Trim TP47610, 1 Piece
TP47610 is a one-piece polished stainless steel Trunk Hatch Accent Trim for the 2007-2010 Lincoln MKX 4-door SUV. The listing includes an installation note: "Remove logo and replace upon installation".
The logo comes off first
According to that note, the logo on the hatch has to be taken off before this piece goes on, and then put back afterward. The record doesn't explain how the logo is attached or how to remove it safely. Before you start, call 877-752-3811 so we can talk you through it, and check the photos to see how the finished trim and logo sit together.
Things to plan for
- A way to remove the logo without scratching the paint
- Something to reattach the logo with afterward, if its original fixing can't be reused
- Time to clean the area thoroughly once the logo is off
Ask us about any of these before you begin.
Construction
The MKX trunk accent is USA-made polished 26 gauge 304 stainless; the logo comes off for installation and goes back on, and 3M automotive-grade acrylic foam tape holds the piece. According to QAA, the tape will hold for a lifetime without damaging the 2007-2010 Lincoln.
No linked parts
No other QAA trim is linked to this MKX in the record.
Cleaning
Once the logo is off, wash the hatch, rinse and dry. Remove wax and any residue left behind by the logo with a wax-and-grease remover, then wipe with isopropyl alcohol just before fitting.
Dry fit
Hold the trim in position with its liner on, compare with the photos, and mark its edges with painter's tape. Check that the logo will go back in its place once the trim is fitted.
Bonding
- Peel the liner.
- Align the piece with your marks.
- Set it down without sliding.
- Press firmly over the whole piece.
- Reattach the logo as you planned.
Conditions
Choose a mild, dry day out of direct sun. Leave the SUV unwashed for a day.
Care
Mild soap, water and a soft cloth; a non-abrasive stainless cleaner for fingerprints.
Tools
Painter's tape, lint-free cloths, wax-and-grease remover and isopropyl alcohol, plus whatever is needed for the logo, which we can advise on.
Before ordering
Confirm the SUV is a 2007 to 2010 MKX and that you're comfortable removing and refitting the logo. If not, a body shop can do that step. Check the piece against the photos when the box arrives, and store it flat until fitting day.
Afterward
The next morning, check the trim's edges and the logo, and press down anything that has lifted.
Protecting the paint
Lay masking tape around the logo before you work on it, so any tool that slips touches tape rather than paint. Keep the logo somewhere safe and clean while it's off, and check its back for old adhesive that would stop it sitting flat when it goes back on. Work slowly; there's no need to rush this step, and a helper can hold the hatch steady.
The MKX accent comes under part TP47610 and UPC 691821675319. Questions? 877-752-3811.
TP47610 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TP47610 |
| UPC | 691821675319 |
| Part type | Trunk Hatch Accent Trim |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | Remove logo and replace upon installation |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2007-2010 Lincoln MKX |
Fitment: TP47610
| Vehicle | Years | Body style |
|---|---|---|
| Lincoln MKX | 2007-2010 | 4-door, SUV |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: Trunk Hatch Accent Trim
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TP47610 Trunk Hatch Accent Trim
Which SUV does TP47610 fit?
The 2007-2010 Lincoln MKX 4-door SUV.
Do I need to remove the logo?
Yes. The listing says to remove the logo & replace it upon installation.
What is it made of?
Polished 26 gauge 304 stainless steel, made in the USA.
How many pieces?
One.
