Product Description
Toyota C-HR 2018-2023 Rear Hatch Accent, Polished 304 Stainless (RD18140)
QAA lists the Toyota C-HR as a 4-door crossover SUV, and RD18140 is the one-piece rear accent for it, model years 2018 through 2023. It is 304 stainless steel with a mirror polish, made in the USA, and it mounts with 3M tape over the existing surface.
Six model years
2018 through 2023.
A trunk accent on a crossover
The part name is rear deck accent. On the C-HR it goes on the rear hatch.
Size not listed
The catalog does not give a width or length, so the photos are how you judge it against your hatch. Call for a measurement if you want one.
The C-HR has a deep lineup
Thirteen other QAA parts are linked to this crossover. The window and pillar pieces alone give you a lot to choose from:
- PP18140, four-piece pillar kit with the top trim crease
- PP18141, PP18142, PP18143, PP18144, pillar kits in six, eight, ten, and twelve pieces
- WP18140, a 20-piece window package with upper trim, window sills, and pillar posts
- WP18141, eight pieces with upper trim and window sills, no pillar posts
- WP18142, four pieces with upper trim only
- WS18140, a four-piece window sill set, face of sills only
Around the body
TH18140 is an eight-piece upper rocker kit that installs on top of the plastic cladding. FV18140 is a two-piece front vent trim. DH18140 is a six-piece door handle accent for the rear door handles only. LP18140 is the license plate bezel for the back.
Rear door handles only
DH18140 covers the rear door handles only.
Material
26-gauge 304 stainless, polished. No plating to lift.
Mounting
The C-HR accent is held on with 3M automotive-grade acrylic foam tape. QAA says that tape will hold for a lifetime without damaging the crossover's rear surface.
Prep
Wash and dry the hatch, then wipe the mounting area with a residue-free cleaner. Repair chips first.
Install
With the liner on, hold the accent where the photos show it. Measure from each end to the hatch edges, adjust until even, and mark with painter's tape. On a dry, mild day, peel and press from the middle outward. Wait a few days before washing. The Installation tab has full steps.
Care
Mild soap and a soft cloth. Avoid compounds and abrasive pads, and dry the hatch after rinsing.
Choosing a window package
The three window packages step down cleanly. WP18140 has everything: upper trim, sills, and pillar posts. WP18141 drops the pillar posts. WP18142 is upper trim alone. If you already own one of the pillar kits, the eight-piece package fills in the rest without doubling up on posts.
Planning the rear
At the rear of the C-HR, the linked pieces are this hatch accent and the LP18140 bezel. Fit the accent first and use it to center the bezel below. Lay both out and dry-fit them together before peeling either liner.
Why stainless
Before buying window or pillar trim later, check each linked C-HR listing for its finish.
Part details
C-HR accent RD18140, UPC 691821444168. Quality Automotive Trims at 877-752-3811 can help you choose a window package.
RD18140 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | RD18140 |
| UPC | 691821444168 |
| Part type | Rear Deck Accent |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2018-2023 Toyota C-HR |
Fitment: RD18140
| Vehicle | Years | Body style |
|---|---|---|
| Toyota C-HR | 2018-2023 | 4-door, Crossover SUV |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2018-2023 Toyota C-HR
- PP18140: 4-piece Pillar Post Trim
- PP18141: 6-piece Pillar Post Trim
- PP18142: 8-piece Pillar Post Trim
- PP18143: 10-piece Pillar Post Trim
- PP18144: 12-piece Pillar Post Trim
- WP18140: 20-piece Window Trim Package
- WP18141: 8-piece Window Trim Package
- WP18142: 4-piece Window Trim Package
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rear Deck Accent
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: RD18140 Rear Deck Accent
Which vehicle does RD18140 fit?
The Toyota C-HR 4-door crossover SUV, 2018 through 2023.
Where does it mount?
On the rear hatch. QAA calls it a rear deck accent.
How wide is it?
The catalog does not list a width. Check the photos or call.
Which window package includes pillar posts?
WP18140, the 20-piece package.
How does it install?
With 3M automotive-grade acrylic foam tape.
