Product Description
Toyota Corolla Sedan 2020-2026 Rear Deck Accent, Polished Stainless (RD70112)
This is a trunk strip in the literal sense. RD70112 fits the Toyota Corolla 4-door sedan from 2020 through 2026, and it goes across the trunk lid: one piece of mirror-polished 26-gauge 304 stainless steel, made in the USA.
Sedan only
The record lists a single body style, the 4-door sedan. If your Corolla is a different body style, this listing doesn't cover it; call to ask about yours.
Size
The data gives no width. The photos show the strip on the lid; compare where it sits to your trunk's badge and edges. For a measurement, call Quality Automotive Trims at 877-752-3811.
Tape, not tools
The Corolla accent is held over the existing surface by 3M automotive-grade acrylic foam tape. Per QAA, the tape will hold for a lifetime without harming the Toyota.
A big family of Corolla parts
This Corolla has a long list of linked numbers, so it helps to sort them by where they go. Around the trunk and plate, there's LB70112, a one-piece license bar above-plate accent, and LP70112, a license plate bezel. Along the sides, TH70112 is a four-piece lower rocker kit on the doors only, spanning from the bottom of the door up to 1.37 inches, with a 1.6 to 1.37 inch width note. WS70112 is a four-piece window sill set, face trim only. GC70112 is the gas door cover trim.
For the windows, PP70112 through PP70117 are pillar kits in four, six, eight, ten, twelve, and fourteen pieces; PP70115's note says it includes the rear triangle. WP70112 is a twenty-six-piece full package with upper trim, pillar posts, and sills, and WP70113 is twelve pieces with upper trim and sills but no pillar posts.
Check each listing for its finish if you want everything to look alike; this sheet describes only the trunk strip.
Choosing what else to buy
If the rear is your focus, the license bar and bezel are the natural partners. Install this strip first, then the bar, then the bezel, so each one lines up under the last.
Getting the lid ready
Wash and dry the trunk lid. Wipe the strip's area with a residue-free cleaner, switching to clean cloths until nothing comes off. Fix any chips where the tape will land.
Laying it on
Set the strip on the lid with its liner still attached and compare with the photos. Measure each end to the lid edges and mark the line with painter's tape. Peel, press at the center, and work toward both ends. A dry day in mild temperatures gives the tape its best start. The Installation tab has the rest.
Keeping it bright
Give it a few days before washing, then mild soap and a soft cloth. On solid 304, a light scuff reveals more of the same steel.
Light and timing
A long, slim strip shows any tilt, so work in even light, like a garage or an overcast afternoon. Allow about half an hour for prep and placement; the press itself takes a minute.
Decorative
It doesn't replace a factory part, and the trunk opens as before. SKU RD70112, UPC 840251605469.
RD70112 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | RD70112 |
| UPC | 840251605469 |
| Part type | Rear Deck Accent |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2020-2026 Toyota Corolla |
Fitment: RD70112
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Corolla | 2020-2026 | 4-door, Sedan |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2020-2026 Toyota Corolla
- PP70112: 4-piece Pillar Post Trim
- PP70113: 6-piece Pillar Post Trim
- PP70114: 8-piece Pillar Post Trim
- PP70115: 10-piece Pillar Post Trim
- PP70116: 12-piece Pillar Post Trim
- PP70117: 14-piece Pillar Post Trim
- GC70112: 1-piece Gas Door Cover Trim
- LB70112: 1-piece License Bar, Above plate accent Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rear Deck Accent
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: RD70112 Rear Deck Accent
Does RD70112 fit the Corolla sedan?
Yes, the Toyota Corolla 4-door sedan, 2020 through 2026.
How wide is it?
No width is listed. Call 877-752-3811 for a measurement.
Which Corolla pillar kit includes the rear triangle?
PP70115, the ten-piece kit.
Is there a license bar?
Yes, LB70112, a one-piece license bar above-plate accent.
Does anything need to come off the trunk lid?
No, it mounts with 3M tape.
