Product Description
TH90535 Nissan Stanza 1990-1992 Sedan Full Rocker Kit, 7.25", 10 Pieces
For the 1990-1992 Nissan Stanza sedan, QAA lists TH90535: ten polished stainless Full Kit pieces that cover the lower doors from the molding's bottom edge to the door's bottom edge, 7.25" as listed.
A single listing
The record has no linked sibling parts, so there's no Upper or Lower Kit alternative listed alongside this one for the Stanza. If you want a different height, call 877-752-3811 and we'll check what else QAA lists.
Molding to door bottom
A Full Kit fills the whole space between the lower edge of the molding and the bottom of the door. The 7.25" figure is the record's width for that space. Measure your own car to confirm:
- Locate the bottom of the Stanza's side molding.
- Measure from there down to each door's lower edge.
- Do it near the front and rear of all four doors.
- Compare each reading with 7.25".
Send us the readings if they don't match.
Ten pieces
The record doesn't say how the ten pieces divide among the four doors and any panels beyond them. Match each piece to the product photos and label every liner before starting.
Construction
All ten Stanza pieces are polished 26 gauge 304 stainless steel, made in the USA, laid over the existing finish with 3M automotive-grade acrylic foam tape. QAA states the tape will hold for a lifetime and will not damage the vehicle's surface.
Molding condition
The top edge of each piece sits against the molding. If the molding is cracked, loose or missing on any door, the piece has nothing to line up with there. Repair it first, or call us before ordering.
Cleaning the band
With 7.25" of height under every piece, prepare the whole area:
- Wash and rinse thoroughly
- Remove wax and old polish from the Stanza's doors with wax-and-grease remover
- Treat chips or rust spots and allow the paint to cure
- A final isopropyl wipe right before each piece goes on
Trial fit
Tape each Stanza piece in place with painter's tape, top against the molding and bottom at the door edge, then swing every door fully open to see that nothing rubs.
Bonding
Peel a few inches of liner at a time and press. Work across the full height, not just the edges, then finish with firm pressure.
Rear of the Stanza
Copy the first Stanza run's measured gaps on the second.
One door first
Complete one door, step back to check the line, and only then go on to the others.
Conditions
Fit on a mild, dry day out of the sun, when the panels are warm. Don't wash the Stanza until the next day.
Ordering
Send the year and your measurement. Keep the box and liners until every piece is on and you're happy with the fit.
If a door reads differently
If one door measures noticeably different from the rest, check whether it or its molding has been replaced. Send us each reading separately rather than an average; that tells us more.
Sort and label all ten pieces before you start.
Stanza Full Kit TH90535, UPC 691821251834; QAA on 877-752-3811.
TH90535 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH90535 |
| UPC | 691821251834 |
| Part type | Rocker Panel Trim, Full Kit |
| Pieces in kit | 10 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 7.25" |
| Coverage / notes | Spans from the bottom of the molding to the bottom of the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1990-1992 Nissan Stanza |
Fitment: TH90535
| Vehicle | Years | Body style |
|---|---|---|
| Nissan Stanza | 1990-1992 | 4-door, Sedan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: Rocker Panel Trim, Full Kit
- Unpack all 10 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH90535 Rocker Panel Trim, Full Kit
Which Stanza does TH90535 fit?
The 1990-1992 Nissan Stanza 4-door sedan.
Where does it install?
From the bottom of the molding to the bottom of the door.
How wide is it?
7.25".
How many pieces?
Ten.
