Product Description
Ford Ranger XLT Extra Cab Short Bed with Flares, 1993-2012: Ten-Piece 6" Rocker Kit (TH33320)
TH33320 is one of several Ford Ranger rocker kits QAA catalogs in linked groups. Its tag is "Pickup Truck, XLT, Extra Cab, Short Bed, w/ Flares," model years 1993 through 2012. It's ten pieces of polished stainless steel at 6", a Full Kit that "Spans from the bottom of the molding to the bottom of the door." It also carries a note the record doesn't explain: "QAA Molding."
About "QAA Molding"
That phrase appears in the width bullet and in the "What's included" line, but nowhere does the record say what it means: whether it refers to a molding QAA supplies, a molding the truck must already have, or something else. It also doesn't say any molding is included in the box. Before ordering, call 877-752-3811 and ask how this note applies to your truck. We'd rather explain it on the phone.
The Extra Cab short bed choices
- TH33320 (this kit): 6", QAA Molding, w/ Flares
- TH33321: 6", QAA Molding, NO Flares
- TH33329: 8.5", With Trim Crease, w/ Flares
- TH33324: 8.5", With Trim Crease, NO Flares
TH33326 is the Extra Cab long bed kit (6", NO Flares). So for an Extra Cab short bed with flares, you're choosing between this 6" kit and the 8.5" TH33329. The record ties the 6" kits to the QAA Molding note and the 8.5" kits to a trim crease; it doesn't explain more.
XLT
The fitment names the XLT trim. If your Ranger is another trim, check with us before buying.
Twenty years on one row
1993 to 2012 is a long span for a single fitment row. If your Ranger is from either end of it, mention the year when you call.
Build
Each of the ten Ranger XLT Extra Cab pieces starts as polished 26 gauge 304 stainless steel in the USA and is bonded to the flared truck's existing surface with 3M automotive-grade acrylic foam tape. According to QAA, the tape will hold for a lifetime without harm.
Around the flares
Dry-fit the pieces closest to the wheel openings first and make sure their ends sit flat and stop short of the flares as the photos show.
Ten pieces
No positions are listed. Lay the Ranger pieces out, compare them with the photos, and label each.
Prep and mounting
Wash, dry and wipe with isopropyl alcohol. Set each piece's top edge at the molding line, liner on, then peel and press. Close each door after its piece.
Even Ranger joints
Once a couple of pieces are on, measure where each sits relative to the door gap and wheel openings, then keep those numbers for the rest.
What to have ready when you call
Model year, trim, cab, bed length, whether it has flares, and a photo of a door's lower half with a tape measure held up from the bottom. That covers both the QAA Molding question and the 6" versus 8.5" choice.
Install day
Dry, mild weather suits the Ranger; wait a day before washing.
Ford Ranger kit TH33320 has UPC 691821303649; Quality Automotive Trims takes calls at 877-752-3811.
TH33320 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH33320 |
| UPC | 691821303649 |
| Part type | Rocker Panel Trim, Full Kit |
| Pieces in kit | 10 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 6" |
| Coverage / notes | QAA Molding; Spans from the bottom of the molding to the bottom of the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1993-2012 Ford Ranger |
Fitment: TH33320
| Vehicle | Years | Body style |
|---|---|---|
| Ford Ranger | 1993-2012 | Pickup Truck, XLT, Extra Cab, Short Bed, w/ Flares |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 1993-2012 Ford Ranger
- TH33321: 10-piece Rocker Panel Trim, Full Kit
- TH33324: 10-piece Rocker Panel Trim, Full Kit
- TH33326: 10-piece Rocker Panel Trim, Full Kit
- TH33329: 10-piece Rocker Panel Trim, Full Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Full Kit
- Unpack all 10 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH33320 Rocker Panel Trim, Full Kit
What does "QAA Molding" mean on TH33320?
The record doesn't explain it. Call 877-752-3811 before ordering.
Does it fit a Ranger without flares?
It's tagged w/ Flares. TH33321 is the 6" Extra Cab short bed NO Flares kit.
Is there a taller kit?
TH33329 is an 8.5" Extra Cab short bed kit with flares and a trim crease.
Which years?
1993-2012.
