Product Description
Ford Ranger XLT Extra Cab Long Bed, No Flares, 1993-2012: Ten-Piece 6" Rocker Kit (TH33326)
Among the linked Ranger Extra Cab kits, TH33326 is the only long bed. Its tag reads "Pickup Truck, XLT, Extra Cab, Long Bed, NO Flares," for model years 1993 through 2012. The kit is ten pieces of polished stainless steel, 6" wide, a Full Kit that "Spans from the bottom of the molding to the bottom of the door," with the width note "QAA Molding."
Long bed only
The four other Extra Cab kits linked here are all short bed: TH33320 and TH33321 at 6", and TH33324 and TH33329 at 8.5" with a trim crease. If your Extra Cab has the long bed and no flares, this is the listing that carries that tag. There's no long-bed Extra Cab kit with flares among the linked parts, so if that's your truck, call 877-752-3811.
The molding note
"QAA Molding" appears in the record without explanation. We can't say from the data whether it refers to existing molding on the truck or a QAA part, and nothing says molding ships in the box. Ask us before ordering.
Checking your bed
If you aren't sure whether your truck is a long or short bed, a tape measure along the bed floor settles it. Mention the figure when you call.
Fitment
Ford Ranger pickup, XLT, Extra Cab, long bed, NO Flares, 1993-2012. No door count is given.
Materials
These ten long-bed Ranger pieces are made in the USA from polished 26 gauge 304 stainless steel. 3M automotive-grade acrylic foam tape holds them over the existing paint; QAA says the tape will hold for a lifetime without damaging it.
Measuring the band
The record lists 6" from the bottom of the molding to the bottom of the door. Check the front and rear of the door on your truck.
Ten pieces
Positions aren't in the record. Lay them out, compare with the photos, label each liner.
Cleaning
Car soap, rinse, dry, then isopropyl alcohol until clean. Test old paint with a strip of painter's tape and fix any lifting areas first.
Mounting
Liner on for the dry-fit. When it sits right, peel a short length, align with the molding line and press; continue along. Open and shut the door after each piece.
No-flare ends
Make sure the outermost pieces sit flat right to their ends. Press the last inch of each one firmly; ends are where a strip first shows if the tape didn't bond.
A long year range
One fitment row covers 1993 to 2012. The record doesn't note any change in fit along the way, but tell us your year when you call.
A straight Ranger line
Take each position from the door gap, then match later pieces.
Supplies
Wash the long-bed Ranger's doors with soap, wipe with isopropyl alcohol on lint-free cloths, mark the line with painter's tape and a tape measure, and use a plastic tool on residue.
Install day
A dry, mild day; a day before washing; a non-abrasive polish for upkeep.
Call ahead
Year, bed length, flares or not, and a door photo cover most questions on this kit.
Questions on Ranger kit TH33326 (UPC 691821572953) go to 877-752-3811.
TH33326 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH33326 |
| UPC | 691821572953 |
| Part type | Rocker Panel Trim, Full Kit |
| Pieces in kit | 10 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 6" |
| Coverage / notes | QAA Molding; Spans from the bottom of the molding to the bottom of the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1993-2012 Ford Ranger |
Fitment: TH33326
| Vehicle | Years | Body style |
|---|---|---|
| Ford Ranger | 1993-2012 | Pickup Truck, XLT, Extra Cab, Long Bed, NO Flares |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 1993-2012 Ford Ranger
- TH33320: 10-piece Rocker Panel Trim, Full Kit
- TH33321: 10-piece Rocker Panel Trim, Full Kit
- TH33324: 10-piece Rocker Panel Trim, Full Kit
- TH33329: 10-piece Rocker Panel Trim, Full Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Full Kit
- Unpack all 10 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH33326 Rocker Panel Trim, Full Kit
Does TH33326 fit a short bed?
No. It's tagged long bed. The short bed Extra Cab kits are TH33320, TH33321, TH33324 and TH33329.
What about a long bed with flares?
None is linked here. Call 877-752-3811.
What does "QAA Molding" mean?
The record doesn't say. Ask us before ordering.
Which years?
1993-2012.
